- 349
- 508
- 93
- Location
- St. Joseph Missouri
Just make sure the Diode is going in the correct direction.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MEP-802A/803A S1 Master Switch Source - Electroswitch
- Thread starter Zed254
- Start date
majoday
Active member
- 88
- 165
- 33
- Location
- Bloomburg,TX
Thank you! I was pondering that. I really wish to do this w/o any error. I really appreciate the info!
- 2,289
- 4,045
- 113
- Location
- Pepperell, Massachusetts
Just be sure the end of the diode with the white stripe on it is attached to terminal 1 of the switch.
- 17,767
- 26,490
- 113
- Location
- Burgkunstadt, Germany
Its easy!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
majoday
Active member
- 88
- 165
- 33
- Location
- Bloomburg,TX
Will Do. Thank you!
- 17,767
- 26,490
- 113
- Location
- Burgkunstadt, Germany
You might try opening a "Parts Wanted".
Look at the -24P TM and find the part number for the diode. They are easy to find in the internet. Mouser sells them.
Might help to show us what type switch you have. Then you can maybe find a knob.
Look at the -24P TM and find the part number for the diode. They are easy to find in the internet. Mouser sells them.
Might help to show us what type switch you have. Then you can maybe find a knob.
- 2,289
- 4,045
- 113
- Location
- Pepperell, Massachusetts
It's a common diode. P/N 1N5406