Jyd530
New member
- 9
- 2
- 3
- Location
- Redding ,ca
Hey I'm in Redding and have a 8v92ta if you need one. I'm quite familiar to with those detroit jimmys
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
need hemtt Detroit Diesel 8v92ta mechanic near Sacramento
- Thread starter bigmike
- Start date
- 8,649
- 3,009
- 113
- Location
- Monrovia, Ca.
NOW you say something!
No kidding. Hahaha
Update 10/20/2020
everything is installed at this point. I had to order oil because apparently SAE 40 is hard to find. I’ll have it next Tuesday. I have the spare oil filter ready as well. Filled the radiator with 10 gallons plus 10 gallons of water. New batteries are next.
everything is installed at this point. I had to order oil because apparently SAE 40 is hard to find. I’ll have it next Tuesday. I have the spare oil filter ready as well. Filled the radiator with 10 gallons plus 10 gallons of water. New batteries are next.
- 6,682
- 14,258
- 113
- Location
- Hawthorne, NV.
Jyd530, hang on to it. Mike has an LDT 465 1D salted away, he might like to have a spare 8V92TA.
- 8,649
- 3,009
- 113
- Location
- Monrovia, Ca.
Is his barn big enough?
- 8,649
- 3,009
- 113
- Location
- Monrovia, Ca.
What, no new paint??!!
- 6,682
- 14,258
- 113
- Location
- Hawthorne, NV.
Will, I'm certain that's on Mike's to do list. If all goes well with the engine run, there will be a BBQ at Mikes barn. Last time I was there he was hiding a Brisket in the Fridge!What, no new paint??!!
Last edited:
- 8,649
- 3,009
- 113
- Location
- Monrovia, Ca.
Smoke leaking from the tailpipe yet? My D-max project made .....well, no smoke, still runs the same. Me thinks a "tuner" that was on it issue or a $800 sensor.
Update 11/07/2020:
WE HAVE SMOKE!!!!
Yes folks, she fired up today...about time...
I built a device to pressurize the fuel system. I couldn’t believe how long it took to get fuel slowing. I used 10 PSI to get the fuel to flow thru the system. Good thing I did because I found 2 fuel lines loose. Here is my pressurizer rig. 10 PSI BTW.
WE HAVE SMOKE!!!!
Yes folks, she fired up today...about time...
I built a device to pressurize the fuel system. I couldn’t believe how long it took to get fuel slowing. I used 10 PSI to get the fuel to flow thru the system. Good thing I did because I found 2 fuel lines loose. Here is my pressurizer rig. 10 PSI BTW.
Attachments
Last edited:
- 6,682
- 14,258
- 113
- Location
- Hawthorne, NV.
Mike, a major achievement!!! Take a break and celebrate!!! 
- 6,682
- 14,258
- 113
- Location
- Hawthorne, NV.
Last edited:
- 8,649
- 3,009
- 113
- Location
- Monrovia, Ca.
VERY cool mike! You should get out of the glass business and switch to being a mechanic! Climbing up and down on that kilt ya, huh? Congrats buddy!