-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Official 2013 Georgia Rally Buy/Sell/Trade/Giveaway Thread
- Thread starter swiss
- Start date
goldneagle
Well-known member
- 4,492
- 983
- 113
- Location
- Slidell, LA
Where is MY commission? You can't use the MRE Heaters without power. I think we should call it a draw since it was mutually beneficial.So when will you be sending my commission?
goldneagle
Well-known member
- 4,492
- 983
- 113
- Location
- Slidell, LA
Here is the wiring setup to use with the MRE heater.
Please verify just in case I messed up. (The heater only uses 2 pins)
Please verify just in case I messed up. (The heater only uses 2 pins)
docfarmall
New member
- 1,947
- 26
- 0
M 1008 = $3100.00
pioneer trailer $1800.00 painted AF ROYAL BLUE
also have numerious genset parts fuel tanks, battery holders, starters,gauges,throttle cables,battery cables,fuel filter blocks,also have a motor off 10 kw only 7 hours on it . See something or need something drop me a call. Thanks for readn.
pioneer trailer $1800.00 painted AF ROYAL BLUE
also have numerious genset parts fuel tanks, battery holders, starters,gauges,throttle cables,battery cables,fuel filter blocks,also have a motor off 10 kw only 7 hours on it . See something or need something drop me a call. Thanks for readn.
Streamline
Active member
- 544
- 107
- 43
- Location
- Comer, Ga.
I gotcha down now! Sorry for delay on answering you I thought you were part of the PM's I was sent on this add that I answered! Thanks
Whiterabbit
Member
- 744
- 14
- 18
- Location
- Bristol Va.
I've got a few more new cucv 6.2 injectors, some still in the wraper and some not and a new 6.2 fuel pump in the box. I'll bring them. (cheap)
New MKT burner M2A, never fired. It's got just a little corosion on the end near the valve, nothing major. It's missing the little handle that is supposed to be on the chain. Would be nice for low country boils!
Lower vehicle fiberglass ant. mast. I'm not sure of the model but it's the one with the smaller threads, might have the top piece too. Somewhere....(free)
NEED= M151A2 Mutt parts: 3 good tires, Vinyl top and cushions (I got frt bottoms), lower ball joints,frt. seat,back seat top piece or springs for back of seat, the little horizontal bars over the doors on the bow and other 151 junk.
New MKT burner M2A, never fired. It's got just a little corosion on the end near the valve, nothing major. It's missing the little handle that is supposed to be on the chain. Would be nice for low country boils!
Lower vehicle fiberglass ant. mast. I'm not sure of the model but it's the one with the smaller threads, might have the top piece too. Somewhere....(free)
NEED= M151A2 Mutt parts: 3 good tires, Vinyl top and cushions (I got frt bottoms), lower ball joints,frt. seat,back seat top piece or springs for back of seat, the little horizontal bars over the doors on the bow and other 151 junk.
Just checked the TM. Your diagram is correct.
A terminal is the 24v power
B terminal is the ground
C terminal isn't used
Streamline
Active member
- 544
- 107
- 43
- Location
- Comer, Ga.
What is the prices for the Injectors and Pump? PM me if needed! Thanks BobbyI've got a few more new cucv 6.2 injectors, some still in the wraper and some not and a new 6.2 fuel pump in the box. I'll bring them. (cheap)
New MKT burner M2A, never fired. It's got just a little corosion on the end near the valve, nothing major. It's missing the little handle that is supposed to be on the chain. Would be nice for low country boils!
Lower vehicle fiberglass ant. mast. I'm not sure of the model but it's the one with the smaller threads, might have the top piece too. Somewhere....(free)
NEED= M151A2 Mutt parts: 3 good tires, Vinyl top and cushions (I got frt bottoms), lower ball joints,frt. seat,back seat top piece or springs for back of seat, the little horizontal bars over the doors on the bow and other 151 junk.
motorman
New member
- 52
- 1
- 0
- Location
- Loganville GA
have green jerry cans (20L NATO cans)
boxes of 4 jerry cans with 4 pouring spouts for $ 160 per 4 cans / spouts
i can probably only bring 36 boxes due to space limitation
have a 'take off' banks turbo for a 6.2 everything you see here + new banks boost & egt gauges $ 650
looking to buy a complete towbar for M1009
boxes of 4 jerry cans with 4 pouring spouts for $ 160 per 4 cans / spouts
i can probably only bring 36 boxes due to space limitation
have a 'take off' banks turbo for a 6.2 everything you see here + new banks boost & egt gauges $ 650
looking to buy a complete towbar for M1009
Last edited:
CARNAC is bring a bunch of towbars to the rally. $200 delivered. Feet and pins extra
Get your order in now.
http://www.steelsoldiers.com/showthread.php?111863-hauling-towbars-from-CA-to-Georgia-rally
Get your order in now.
http://www.steelsoldiers.com/showthread.php?111863-hauling-towbars-from-CA-to-Georgia-rally
Last edited:
Whiterabbit
Member
- 744
- 14
- 18
- Location
- Bristol Va.
My 6.2 stuff is gone.
Still got that burner..........
Gott'a pay for the gas to get to the rally!
Did find some very nice tacometers/hr meters(just a few hrs on one) and some gauges in the garage, bringing them.
Still got that burner..........
Gott'a pay for the gas to get to the rally!
Did find some very nice tacometers/hr meters(just a few hrs on one) and some gauges in the garage, bringing them.
- 2,726
- 835
- 113
- Location
- Oakwood, Ga
Good afternoon everyone,
WTB Wanted To Buy
Does anyone have the back seat buckles for a (M1009) wheel chock . These are the seat belt buckles that go on the outside of the back seat on each side of the seat. They are bolted to the floor near the front of the fender well. Item number 25 in the manual
WTB Wanted To Buy
Does anyone have the back seat buckles for a (M1009) wheel chock . These are the seat belt buckles that go on the outside of the back seat on each side of the seat. They are bolted to the floor near the front of the fender well. Item number 25 in the manual
Last edited:
ThunderCracker
Member
- 665
- 7
- 18
- Location
- Madison Alabama
Steven I should have an extra set. They are used. I will double check and can bring them with your visor and rim.
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
Who was it that had all those 6TL batteries last year, I just cannot remember and I apologize for having to many birthdays.
Also, does anyone have or sell the smaller MEP005 batteries, I believe they are 6TN batteries. If so, and new, I would like two of those.
One of the new 6TLs if the price is like last year, which was great.
Also, if someone has a NEW and unused mounted on MRAP wheel 395-85 tire for $350 or less, I would like a picture of that and would buy it assuming the picture is OK. PM me for email address.
Also, does anyone have or sell the smaller MEP005 batteries, I believe they are 6TN batteries. If so, and new, I would like two of those.
One of the new 6TLs if the price is like last year, which was great.
Also, if someone has a NEW and unused mounted on MRAP wheel 395-85 tire for $350 or less, I would like a picture of that and would buy it assuming the picture is OK. PM me for email address.
Last edited:
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Mikev had the 6tl batts
- 5,606
- 2,899
- 113
- Location
- Metairie/La (N'awlins)
Dell,
PM sent on mrap wheel & Tire.
Juan
PM sent on mrap wheel & Tire.
Juan
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
anyone interested in a complete winch set up for a duece and some 900 x20 tires mounted on duece rims? i have 5 in good shape
MDSA
Member
- 705
- 12
- 18
- Location
- Valdese, NC
Anybody have the 24volt military flashers at the rally? Both mine went out on the Deuce and M37.
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
Eriks Military Surplus has the newer solid state ones that are suppossed to help with LEDs for $42 if you cannot find one at the Rally.
I bought mine there in mid season between Rallies.
I bought mine there in mid season between Rallies.