Official 2013 Georgia Rally Buy/Sell/Trade/Giveaway Thread

[Streamline]

One Cambro 8 tray side load server left! $150.00

 

[wreckerman893]

Anyone have a non gold plated deuce fuel tank for sale? Need just the tank, no hangars or pump.

Let me call Freighttrain and see what he has. He's been parting out a deuce.

 

[phil2968]

One Cambro 8 tray side load server left! $150.00

I wonder if Vinny needs another one? He is out of town and may not be watching this thread.

Yes he does! Maybe he will chime in. I sent him a text.

 

[wreckerman893]

I have a buddy that bought two 5 tons with dropsides. He made a dumper out of one and sold the other. The buyer didn't want the sideracks and bows. He has two sets (no tarps). He's asking 300 each. He says they are in good shape but are wood not fiberglass. If anyone wants one or both I'll haul them to the rally but won't haul them otherwise.

 

[timntrucks]

7 cases of mre's sold so far anyone else want some

 

[docfarmall]

Bump

Thanks

Still have a super nice pioneer trailer can bring if prepaid .
As with all items Must be prepaid before loading .If u see it listed or no something i may have and want it brought CALL ME.

Have good 1008 radator up here
some 1008 wheels and decent tires
HMMWV transfer case dont no anything about it in plastic case
have a pair of 40,000 lifting straps looked them up thier like 2,000. Take 800 ea or 1500 pair
Thanks

Also genset parts
fuel tanks for 5kw,10kw lots of parts

LOOKING FOR THESE ITEMS
mollie mag pouches
Need these baddly running on slicks
265/75/16 10ply need 6 badly and
285/75/16 10 ply need 4
235/75/16 10 ply
need rail and trollie for a typo graph machine or a good parts machine.
large top toolbox for roll around ..... cheap
woodland pancho liners
larger sizes in field jackets and bdu's l,xl,xxl .
bruce lights
11.0020 ndt's

 

[Streamline]

I wonder if Vinny needs another one? He is out of town and may not be watching this thread.

Yes he does! Maybe he will chime in. I sent him a text.

Well if he does and send me some cash"O"la so we have some in the account we may go ahead and go get a few more before the guy runs out because I have had several PM's on these! If anyone else wants one let me know by Monday morning and if you could send a deposit of at Least $50 it will help us pick them up these things are more pricy than the things I normally get but they are cool!

 

[glcaines]

I need one wooden bow for an M35A2 in good condition. I also need a drivers seat bottom cushion (non springer) for a deuce in good condition - mice ate mine. If someone has a cargo safety strap for a deuce that is the older canvas type for a good price I may be interested. Actually I could use two of the safety straps.

 

[pctrans]

ok, boys and girls, break out the piggy banks, skim the kids lunch money, whatever it takes to claim some of my "treasures". Items without a price are negotiable, make an offer. Large items will not get loaded unless prior payment is arranged. (i don't take paypal). In order to keep better track of things, please address all questions, orders and pic requests to the following website: flmilitarytrucks@gmail.com

deuce
ldt-465, running motor, complete - $800
tool boxes, driver side - $25
battery box compartment - $25
fuel tank, no rust, no dents; needs cleaned - $75
(2) steering gear box - $40
tranny - $300
transfer case - $300
water pump - $25
(2) sets troop seats, wood rails w/fibreglas seat sections - $100
wood headboard - $40
(3) sets oak bed support rails -
(4) new split-rim lock rings - $5/ea
mudflaps - $10/each
(2) nos exhaust tailpipes - $70
(2) radiators, flushed and tested - $400/ea
air tanks, takeoffs - $15/ea
new hardtop kit, incl all hdwe and gaskets, fits deuce or 800 series 5-ton - $1100
several engine compartment side panels - $5/ea
(2) sets window crank assy - $20/each piece
new reman ip - $650
(5) new clutch "pressure plates" - $40/ea
upper dogbones, with axle mounts
rear axle trunion assy (w/dogbones and springs) - $50
exhaust j-pipe, take-off, good condition - $100
exhaust flex-pipe, behind turbo - $40
driveshafts, starting at $100
doors, left and right, good condition, with glass, cranks and handles - $125/ea
fuel tank supports -
steering wheel, decent, no big cracks -
fan blade - $10
grill - $25
(4) bumpers - $100/ea
mushroom cap - $10
headlight buckets -
front turn signal, w/frame - $15
hood, very nice condition - $100
hardtop, lower window section, good take-off - $50
mirror bracket set, "wide" version, with mirrors - $25/ea
upper exhaust bracket - $5
transfer case shift handle -

5-ton (800 series)
(3) m818 fuel tanks - $50/ea
tank support brackets - $15/pair
battery cover/step - $15
(2) tranny's, from 818's - $250/ea
transfer case - $300
passenger fender - $75
headlight panels, (2) left, (2) right - $5/ea
m817 dump truck troop seat set - $125
(3) headboard sections - $25/ea
(2) nos exhaust tailpipes - $100/ea
lower steering shafts (u-joints on each end) - $25/ea
cargo cover, nos vinyl, 3-piece - $150
engine compartment side panels - $5/each
steering wheel and column (from 1960 gasser) - $25
(2) power steering gear boxes (take-offs) - $50/each

5-ton (900 series)
(2) rear differential chunks - $200/ea
spare tire clamp brackets, (3) narrow - $15/ea; (1) wide - $20
troop seat set, for m927/928 longbed, fibreglas, nearly new - $200
mirror brackets, (2) sets - $25/set

bump - bump

 

[pctrans]

some miscellaneous items to spend the rest of your lunch money on....

as stated earlier, please direct all inquiries and pic requests to: flmilitarytrucks@gmail.com

slave cable - $200
24 volt lugmaster impact wrench - new in bag - $400
inflator hose and gauge - $20
assorted lug wrenches - ?
Battery hold-down frames and j-bolts
10 - rubber bead lock rings - $5/ea
3 - deuce heaters - $50/each
nos air tanks - 9.5" x 37" - $30/ea
m105 end rails, fiberglass, green and tan - $75/pair
new - hemtt rims, o-rings, and nuts - $200/ea
5 - m105 metal bows, vg condition - $100/set
red beacon light bar - works good - $75
new - 15' trailer cords, 7-pin "civilian" style - $40/ea
humvee rims, 12-bolt - $30/ea
run-flats for 16.5 rims - $10/ea
m915 - 5th wheel plate assy, w/ramps, air-slide - $120
deuce bumperettes - nice - $50/pr

bump - bump

 

[pctrans]

I am also in need of the spare tire rack for the super-singles, preferably from a 923, 925, or 927 (don't need the toolbox that comes with the 931 rack. Thanx.

 

[timntrucks]

looking for some yellow LED reflectors and some not so pricey front yellow LED blinkers and a 8ton jack

 

[Jimma]

Slave cable for sale. Standard length $150. Im only bringing it if someone wants it.

 

[phil2968]

Well if he does and send me some cash"O"la so we have some in the account we may go ahead and go get a few more before the guy runs out because I have had several PM's on these! If anyone else wants one let me know by Monday morning and if you could send a deposit of at Least $50 it will help us pick them up these things are more pricy than the things I normally get but they are cool!

I just sent him a text with your number. Expect to hear from him.

 

[wreckerman893]

Slave cable for sale. Standard length $150. Im only bringing it if someone wants it.

I was over at my logger buddy's today and he said someone had stolen his set. I'll call him tomorrow and see if he will take them.

 

[timntrucks]

wrecker i be looking at those pads

 

[Reckless]

800 Series pintle hitch with drop bracket - $75

M54 fuel tank (tank only) - $50

1 springer seat (no seat bottom) - $50

M105 bows (wood) - $75

M939 series entire hood assembly with lights and all (NO PASS SIDE FENDER) - $150

I'm sure ill have other stuff just got to dig through it all.

Would be willing to trade on a m35a2 sender and pump assembly.

 

[3rdaavbn]

PM sent

 

[vinny-socom1]

A must have for any emergency vehicle or survival kit!

Im getting these in and will have for the Rally. These are Lightly Used Rescue Strap cutters MULTITOOL Model 4 made for the military by Ontario. NSN# 4240-01-570-0319. These are Coyote Brown tool with a Coyote Molle Pouch. If you want these I need to now ASAP because of small quantity! I can possibly get more if needed!

Hard to find Desert TAN finish aluminum construction. Replaceable seat belt cutter blade. Oxygen valve opener integrated into handle. In emergency situations, handle may also be used as a splint. Its recessed razor-sharp blade cuts through toughest fabrics and materials known to man i

Asking $28.00 each 10 available.


Also check out my Rally sell list on previous page to see if you need any thins. This year my inventory is low on quanities so if you need something let me know ASAP so I can set it out for you! http://www.steelsoldiers.com/showth...a-Rally-Buy-Sell-Trade-Giveaway-Thread/page33

Put it me down for one if you still have them. Vinny

 

[vinny-socom1]

anyone have a need for a rear drive shaft for a 1008. i am leaving sunday heading east i will only bring it if someone is wanting it

Need a good one if it's still available

vinny