• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Official 2017 Ga. Military Vehicle Rally buy-sell-trade thread

1958 M274

Member
333
4
18
Location
North GA
NOS Mermite Can $125
1/2" drive 24volt Robo-Impact with spare parts $150
Two NOS Military lanterns in crate with spare parts $150
Nice M60 replica built on demilled receiver (with ATF letter) $1800

Send me a message if you're interested.
 

Attachments

JohnJuan

Member
83
0
6
Location
Hickory,NC
Georgia Rally For Sale. 5 Ton. 1968 M813 w/winch, w/ hardtop, w/ 30,000 btu heater (arctic kit). 24,000 miles, very good tires and tread, clean, runs good, new batteries. No Bed. Missing a few small items. $4,000 OBO. It's a barn yard find, it was parked for 3 years when I spotted it. Has insurance and GA tag. Can be bought/sold with just a bill of sale. I'll drive it to the GA Steel Soldiers Rally. If interested, call for details...David (CH46) 706-831-6564.
Pm sent
 

Chief_919

Well-known member
2,050
100
63
Location
Western NC
I have a real nice M762 trailer, the flatbed version of the M416 that was rated as a 3/4 ton trailer and has the second raised lunette mount for towing behind an M37 or similar.

Solid, all original. Has what appears to be a bullet hole in the right fender.

$675 or $775 with good used 7:00x16 NDTs swapped on it.

only bring is sold and paid for.
IMG_5605.JPGIMG_5606.JPGIMG_5602.JPGIMG_5603.JPG
 
Last edited:

Dock Rocker

Active member
980
71
28
Location
Jackson ms
Any interest in an 997 ambulance top for a hmmwv? I stumbled across. I would like to swap for some hmmwv parts or cash.

It still has the AC unit upstairs.





Sent from my iPhone using Tapatalk
 

Al Harvey

Active member
1,153
16
38
Location
Dover, TN
Will be loading up the next couple of days. If your wanting any of the HMMWV canvas or large boxes I posted please let me know so I make sure it gets loaded. I also go the lengths for the duct work that I got. Still $50 each.

12" x 24'
12" x 25'
16" x 6'
16" x 14' (x4)
16" x 15' (x2)
18" x 25'
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
Will be loading up the next couple of days. If your wanting any of the HMMWV canvas or large boxes I posted please let me know so I make sure it gets loaded. I also go the lengths for the duct work that I got. Still $50 each.

12" x 24'
12" x 25'
16" x 6'
16" x 14' (x4)
16" x 15' (x2)
18" x 25'
Robert, Do you have any not too tall but about 24/30" wide and 24" across cases? I need something to hold the valve body off that cat transmission that is weatherproof to a point.

I will also take one of the little bird seats.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
- Heavy Tow bar - This is the big one with 1" feet. Some pins $300.
- Puradyn Oil Filter Bypass System - New in box - You may have to make a hose or two to work on your engine - $150.
- Pintle Hitch for M880 $50
- Take out Hour Meter from M939 series showing 41 hours $20

-M939 Take out Jackshafts with both joints. Good Working order. I have 3 of them. $150ea
-M939 Take out radiator- Includes shroud and lower mount. No leaks. $300
-60,000lb DP Hydraulic Winch - Working condition. Will need cable. $600
-Take out Allison MT654CR $900
-Take out Allison Modulator Cable $50
-M923A1 driveshaft Transfer case to Front Tandem with fairly new joints $125
-SEE Stanley Hydraulic RockDrill with 2 bits $200
-SEE Stanley Hydraulic Jackhammer with no tips $200

-Eyecon 360 light kit. Complete in crates $1000These will be brought to the rally, not shipping before hand. I have 3 of these in the crates
-TruckLite 07399 LED light kit. 12 floods, 2 spots, 2 aux lights. Harness and all mounting hardware $450. This will be brought to the rally. Not shipping before hand. I have 2 of these kits.

Anything you want send it to me in a PM, I don't get subscription notifications. Unless I check back here I wont see it.
Bump


Trucklite kits are all sold.

Radiators dropped to 250 ea.
Sent from my SM-G935P using Tapatalk
 
Last edited:

Al Harvey

Active member
1,153
16
38
Location
Dover, TN
Robert, Do you have any not too tall but about 24/30" wide and 24" across cases? I need something to hold the valve body off that cat transmission that is weatherproof to a point.

I will also take one of the little bird seats.
I've got two of the aluminum 33" x 23" x 28" boxes. They have shelves in them but I'm pretty sure they could be removed easily.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
Steel Tractor plates for between the tire carrier and 5th wheel. $20 ea. I have 2. BOTH ARE SOLD

Alliance 14.00-20 Tube or Tubeless tire. Brand new. $200

6.5L Turbo GEP engine in the can. Takeout, runs with good compression 405-420psi. Tested and lower half inspected 06/2017. Was going to be installed but went to a gas burner instead for the customer. Comes with the can $2600.
 

Attachments

Last edited:

Smokinyoda

Member
657
8
18
Location
Franklin, NC
M105 trailer, great to haul all the goodies you bought home.
Looks to be in really good shape except the landing gear has been removed. Its included just laying in bed, looks like po was maybe going to add a smaller jack. Newer paint, good cover. Inside of bed has either been rhino lined or similar bed protector.
$400 and not bringing unless paid for in advance.
 

Attachments

Streamline

Active member
Steel Soldiers Supporter
544
107
43
Location
Comer, Ga.
I have more of these 750 to 1000 watt lights.
These things are bright as ****! One lights up my whole back yard!

Asking $45 for ones with bulbs, and $25 for ones without bulbs.
You will need to wire your own plug up to these, they are 110.

I think I have 5 or 7 with bulbs, and 4 or 5 with no bulbs left.

Lastly check out my deal on New Ammo Cans on page 14
https://www.steelsoldiers.com/showth...-thread/page14

And Im selling my Temper Tent on page 21
https://www.steelsoldiers.com/showth...-thread/page21

Thanks

My prices are not set in stone this year, Negotiation, bulk price discounts, bickering, maybe even some low balling is welcome!
As I mentioned before I'm needing to raise money to buy new equipment, so Im open to offers on my items if my prices are too high!
I will be hopefully be starting up my new business by first of the year, Im still working with the AR500 Steel Targets as well if anyone wants me to bring any targets to the rally this year. I will post a list soon.

As some of you know I have now been in school for a couple years studying CNC Specialist and Machine Tool. Im hoping to be purchasing a CNC laser cutter in January to put in our new shop in Comer Ga. Im also needing to buy other machinery as well like benders, welders, ban-saw...etc

Note: the ammo cans that I'm selling at a major discounted price, are the same exact can that are made for the military. These cans are made right here in Georgia and these were made for Blackhawk.

Note: Im having trouble finding all of my Temper tent cloth at moment, so not sure if I will be able sell the tent complete or at all!
I may have some Tent floors and other tarp items available at rally,
Some large HARDIGG Cases,
Canteen sets with Cups,
Spools of two wire phone wire,
Wooden trunks or boxes...etc

I also can bring some AR500 3/8 Shooting Steel Targets if anyone is interested in them.
We do have a few new targets this year, we have a Silhouette Hostage Reactive now, also some 22cal reactive poppers.

Thanks
 

Attachments

Last edited:

DanM7890

Active member
1,134
11
38
Location
Houston, TX
I have 6 of these left at $100 each. I saved the nicest ones for last.

22091654_10155821192691584_791202538_n.jpg22155261_10155821193126584_1906585339_n.jpg22054620_10155821191831584_246786249_n.jpg



I have 8 of these tan Edak Milex Rack containers. These look brand new. The depth is 24", 19" wide for mounting, 14" tall. This is an 8U. $100 each.


00M0M_80HiTjKdYbo_1200x900.jpg00101_f0lcWoM7w4j_1200x900.jpg00u0u_eSe7K4mVQv9_1200x900.jpg
 

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,806
723
113
Location
Liberty Hill, SC
Good takeout m809 radiator in very good shape $400 will only bring if spoken for.

Really good takeout m939 radiator. Outer fins are folded over a bit from goats but can be straightened easy. $500 only bringing if spoken for.

Need to know soon almost done loading.
 

Chief_919

Well-known member
2,050
100
63
Location
Western NC
Ok last minute odds and ends I have:

M35 3 color camo cargo cover, looks to just have Storage wear $375
Set of cargo cover bows for an M35, wood and metal corners $100
Rare tan cargo cover for a 5 ton cargo with end curtains $300
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks