Official 2017 Ga. Military Vehicle Rally buy-sell-trade thread

[1958 M274]

NOS Mermite Can $125
1/2" drive 24volt Robo-Impact with spare parts $150
Two NOS Military lanterns in crate with spare parts $150
Nice M60 replica built on demilled receiver (with ATF letter) $1800

Send me a message if you're interested.

 

[JohnJuan]

Georgia Rally For Sale. 5 Ton. 1968 M813 w/winch, w/ hardtop, w/ 30,000 btu heater (arctic kit). 24,000 miles, very good tires and tread, clean, runs good, new batteries. No Bed. Missing a few small items. $4,000 OBO. It's a barn yard find, it was parked for 3 years when I spotted it. Has insurance and GA tag. Can be bought/sold with just a bill of sale. I'll drive it to the GA Steel Soldiers Rally. If interested, call for details...David (CH46) 706-831-6564.

Pm sent

 

[Chief_919]

I have a real nice M762 trailer, the flatbed version of the M416 that was rated as a 3/4 ton trailer and has the second raised lunette mount for towing behind an M37 or similar.

Solid, all original. Has what appears to be a bullet hole in the right fender.

$675 or $775 with good used 7:00x16 NDTs swapped on it.

only bring is sold and paid for.

 

[Dock Rocker]

Any interest in an 997 ambulance top for a hmmwv? I stumbled across. I would like to swap for some hmmwv parts or cash.

It still has the AC unit upstairs.

Sent from my iPhone using Tapatalk

 

[Al Harvey]

Will be loading up the next couple of days. If your wanting any of the HMMWV canvas or large boxes I posted please let me know so I make sure it gets loaded. I also go the lengths for the duct work that I got. Still $50 each.

12" x 24'
12" x 25'
16" x 6'
16" x 14' (x4)
16" x 15' (x2)
18" x 25'

 

[simp5782]

Will be loading up the next couple of days. If your wanting any of the HMMWV canvas or large boxes I posted please let me know so I make sure it gets loaded. I also go the lengths for the duct work that I got. Still $50 each.

12" x 24'
12" x 25'
16" x 6'
16" x 14' (x4)
16" x 15' (x2)
18" x 25'

Robert, Do you have any not too tall but about 24/30" wide and 24" across cases? I need something to hold the valve body off that cat transmission that is weatherproof to a point.

I will also take one of the little bird seats.

 

[simp5782]

Looking for 4 1100x20 NDT tires. On wheels even better. And 10 900 x 20s

I will be bringing about a dozen 11.00 NDTs and 9.00s to the rally if you come find me if Jeff and Juan didn't have what you needed.

 

[simp5782]

- Heavy Tow bar - This is the big one with 1" feet. Some pins $300.
- Puradyn Oil Filter Bypass System - New in box - You may have to make a hose or two to work on your engine - $150.
- Pintle Hitch for M880 $50
- Take out Hour Meter from M939 series showing 41 hours $20

-M939 Take out Jackshafts with both joints. Good Working order. I have 3 of them. $150ea
-M939 Take out radiator- Includes shroud and lower mount. No leaks. $300
-60,000lb DP Hydraulic Winch - Working condition. Will need cable. $600
-Take out Allison MT654CR $900
-Take out Allison Modulator Cable $50
-M923A1 driveshaft Transfer case to Front Tandem with fairly new joints $125
-SEE Stanley Hydraulic RockDrill with 2 bits $200
-SEE Stanley Hydraulic Jackhammer with no tips $200

-Eyecon 360 light kit. Complete in crates $1000These will be brought to the rally, not shipping before hand. I have 3 of these in the crates
-TruckLite 07399 LED light kit. 12 floods, 2 spots, 2 aux lights. Harness and all mounting hardware $450. This will be brought to the rally. Not shipping before hand. I have 2 of these kits.

Anything you want send it to me in a PM, I don't get subscription notifications. Unless I check back here I wont see it.

Bump


Trucklite kits are all sold.

Radiators dropped to 250 ea.
Sent from my SM-G935P using Tapatalk

 

[gringeltaube]

Wes, is the M880 pintle hitch still available?

 

[TaylorTradingCo]

He said to PM him because he doesn't get notifications.

Wes, is the M880 pintle hitch still available?

 

[Al Harvey]

Robert, Do you have any not too tall but about 24/30" wide and 24" across cases? I need something to hold the valve body off that cat transmission that is weatherproof to a point.

I will also take one of the little bird seats.

I've got two of the aluminum 33" x 23" x 28" boxes. They have shelves in them but I'm pretty sure they could be removed easily.

 

[simp5782]

I've got two of the aluminum 33" x 23" x 28" boxes. They have shelves in them but I'm pretty sure they could be removed easily.

Throw one in the truck for me sir.

 

[simp5782]

Steel Tractor plates for between the tire carrier and 5th wheel. $20 ea. I have 2. BOTH ARE SOLD

Alliance 14.00-20 Tube or Tubeless tire. Brand new. $200

6.5L Turbo GEP engine in the can. Takeout, runs with good compression 405-420psi. Tested and lower half inspected 06/2017. Was going to be installed but went to a gas burner instead for the customer. Comes with the can $2600.

 

[Smokinyoda]

M105 trailer, great to haul all the goodies you bought home.
Looks to be in really good shape except the landing gear has been removed. Its included just laying in bed, looks like po was maybe going to add a smaller jack. Newer paint, good cover. Inside of bed has either been rhino lined or similar bed protector.
$400 and not bringing unless paid for in advance.

 

[Streamline]

I have more of these 750 to 1000 watt lights.
These things are bright as ****! One lights up my whole back yard!

Asking $45 for ones with bulbs, and $25 for ones without bulbs.
You will need to wire your own plug up to these, they are 110.

I think I have 5 or 7 with bulbs, and 4 or 5 with no bulbs left.

Lastly check out my deal on New Ammo Cans on page 14
https://www.steelsoldiers.com/showth...-thread/page14

And Im selling my Temper Tent on page 21
https://www.steelsoldiers.com/showth...-thread/page21

Thanks

My prices are not set in stone this year, Negotiation, bulk price discounts, bickering, maybe even some low balling is welcome!
As I mentioned before I'm needing to raise money to buy new equipment, so Im open to offers on my items if my prices are too high!
I will be hopefully be starting up my new business by first of the year, Im still working with the AR500 Steel Targets as well if anyone wants me to bring any targets to the rally this year. I will post a list soon.

As some of you know I have now been in school for a couple years studying CNC Specialist and Machine Tool. Im hoping to be purchasing a CNC laser cutter in January to put in our new shop in Comer Ga. Im also needing to buy other machinery as well like benders, welders, ban-saw...etc

Note: the ammo cans that I'm selling at a major discounted price, are the same exact can that are made for the military. These cans are made right here in Georgia and these were made for Blackhawk.

Note: Im having trouble finding all of my Temper tent cloth at moment, so not sure if I will be able sell the tent complete or at all!
I may have some Tent floors and other tarp items available at rally,
Some large HARDIGG Cases,
Canteen sets with Cups,
Spools of two wire phone wire,
Wooden trunks or boxes...etc

I also can bring some AR500 3/8 Shooting Steel Targets if anyone is interested in them.
We do have a few new targets this year, we have a Silhouette Hostage Reactive now, also some 22cal reactive poppers.

Thanks

 

[DanM7890]

I have 6 of these left at $100 each. I saved the nicest ones for last.





I have 8 of these tan Edak Milex Rack containers. These look brand new. The depth is 24", 19" wide for mounting, 14" tall. This is an 8U. $100 each.

 

[simp5782]

Anyone bringing any cases of MREs? Looking for 2.

 

[amgeneral72]

I might have a few

 

[Ferroequinologist]

Good takeout m809 radiator in very good shape $400 will only bring if spoken for.

Really good takeout m939 radiator. Outer fins are folded over a bit from goats but can be straightened easy. $500 only bringing if spoken for.

Need to know soon almost done loading.

 

[Chief_919]

Ok last minute odds and ends I have:

M35 3 color camo cargo cover, looks to just have Storage wear $375
Set of cargo cover bows for an M35, wood and metal corners $100
Rare tan cargo cover for a 5 ton cargo with end curtains $300