• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rear driveshaft u joint bolts stripped

319cssb

Well-known member
1,019
221
63
Location
Easley SC
I have used a product called friction grip drops. It's a paste that you put on the bolt and it increases the friction, this way your 6 point socket has more leverage.
Worked like a charm for me. I also used some penetrating fluid.
 

erasedhammer

Active member
843
60
28
Location
Maryland
I have used a product called friction grip drops. It's a paste that you put on the bolt and it increases the friction, this way your 6 point socket has more leverage.
Worked like a charm for me. I also used some penetrating fluid.
Honestly the whole driveshaft needs replacing anyway.
I have a cheap harbor freight reciprocating saw, with a carbide blade. So I'm just cutting through the bolt.
 

erasedhammer

Active member
843
60
28
Location
Maryland
I got the driveshaft out. Dropped the torque converter cover and now I see that it does have some wear but the teeth are intact. Possible wrong starter?

15605246735292521110028950447507.jpg
 

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,400
4,182
113
Location
Brentwood, Calif
Getting towed to the auto shop is problematic cause the base police aren't too keen on moving the vehicle.
Yeah I found a guys write up on the flywheel replacement, I have the bolts and I've rigged up something to support the t-case and tranny, so I think I'm good there.
That makes absolutely no sense...but like your HMMWV adventures, I suspect this will be no different.
 

erasedhammer

Active member
843
60
28
Location
Maryland
It's not like I want to do this fix in a parking lot. I've called around to friends and rental companies trying to find a trailer, dolly, something that could work. All of them refused. I asked the base police if I could flat tow the truck not even a mile to the shop and they said no.
I'm just working the cards I've been delt.
 

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,400
4,182
113
Location
Brentwood, Calif
It's not like I want to do this fix in a parking lot. I've called around to friends and rental companies trying to find a trailer, dolly, something that could work. All of them refused. I asked the base police if I could flat tow the truck not even a mile to the shop and they said no.
I'm just working the cards I've been delt.

Call a tow truck...and tell the Federal cops to suck it, really.
that or go talk with your First sergeant, none of this makes much sense to me...what base is this?
 

cucvrus

Well-known member
11,473
10,434
113
Location
Jonestown Pennsylvania
That starter is stuck out there in the fly wheel teeth. Disconnect the batteries and get the starter off and checked. That is where I would start. Get a flywheel tool and turn the flywheel 360* and inspect the teeth first hand. Pictures and report back. Good Luck.
 

erasedhammer

Active member
843
60
28
Location
Maryland
That starter is stuck out there in the fly wheel teeth. Disconnect the batteries and get the starter off and checked. That is where I would start. Get a flywheel tool and turn the flywheel 360* and inspect the teeth first hand. Pictures and report back. Good Luck.
Turns out the starter bolt was loose and caused a misalignment. Tightened it and the pinion gear popped back.
Cranks fine now, but itll only run on ether. Definitely have a fuel delivery problem.

On a side note AAA has refused to tow me now.
 

319cssb

Well-known member
1,019
221
63
Location
Easley SC
How did you get out in that parking lot to begin with, if you have fuel problems?
oh wait, youre doing a pick up in ft meade? Is that it?
 

erasedhammer

Active member
843
60
28
Location
Maryland
How did you get out in that parking lot to begin with, if you have fuel problems?
oh wait, youre doing a pick up in ft meade? Is that it?
Called AAA, 4 times, and escorted the tow truck on base. Would not recommend, as AAA has basically disowned my membership and is charging me for every tow, still cheaper than a private tow truck company though.
 

erasedhammer

Active member
843
60
28
Location
Maryland
Yeah, registration is in the mail right now, so they had to charge me. Rental trailer would have been cheaper, but theres no where around me that rents one big enough.
 

319cssb

Well-known member
1,019
221
63
Location
Easley SC
Yeah, registration is in the mail right now, so they had to charge me. Rental trailer would have been cheaper, but theres no where around me that rents one big enough.
you can fit a M1028 on a galvanized u-haul trailer. You might have to take the dually tires off, it it has them.
 

tobyS

Well-known member
4,832
833
113
Location
IN
I've hauled several truck beds using bales of straw in the tracks on those trailers. There is no way that a 1028 should be hauled on one.
 

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,400
4,182
113
Location
Brentwood, Calif
Called AAA, 4 times, and escorted the tow truck on base. Would not recommend, as AAA has basically disowned my membership and is charging me for every tow, still cheaper than a private tow truck company though.
Because you have exceeded your membership limits...based on your history, maybe you would be better off owning your own two truck?
 
Top