- 462
- 968
- 93
- Location
- Germany
If anyone waiting santa claus.... https://boingboing.net/2018/12/24/for-sale-1-santa-in-carboni.html
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Rebuilding after 15 years of storage
- Thread starter PHOENIX-GER
- Start date
Sounds like the solution to your truck problems is to move to the US where this could be you on any saturday night in South Carolina.
Only regulation .... driving something awesome ...
No inspections.
and in a couple hour drive you can get a backup engine for US $400
(1) Marketplace - 1985 Chevrolet chevy blazer | Facebook
Only regulation .... driving something awesome ...
No inspections.
and in a couple hour drive you can get a backup engine for US $400
(1) Marketplace - 1985 Chevrolet chevy blazer | Facebook
Last edited:
- 462
- 968
- 93
- Location
- Germany
Squibbly
I am really jealous of your conditions there
but I am bound here and immigration restrictions also exclude me.
May the Force be with us
I am really jealous of your conditions there
but I am bound here and immigration restrictions also exclude me.May the Force be with us
- 462
- 968
- 93
- Location
- Germany
We are thinking of disconnecting the cab also.... if not now when then ever ?? my wife is already "not glad" about our work of stripping. She can´t imagine fixing it again 
but she trust her husband and her son to do that. 
the box with original wiring of the cab
the box with additional wiring for the horns, lamps, instruments , trailer etc
We hold them almost seperated
Does anybody know if this rubbermounting is still anywhere available?
also that rubber connectors for the exhaustsystem, I guess you can order seperatly the rubber and the metalclamps
Don´t find a number or a description of that part. Metalclamps are no problem to got, but these rubbers fit exactly, I could used some cutted rubber blocks - but if there anywhere is a designed sparepart, than i like to use this.
Found on the TMs following partnumbers for that:
14034504
14034503
14022537
14022538
14034501
a lot of parts appear for renew like the Shock absorbers, stabilizer bushings, steering damper, bolt, nuts, rubberparts....
It would be a waste of money and time not to do everything conscientiously here now. We have increased the budget again, as always in our projects. As a rule, the first estimate is usually only 50% of the expected volume. The time will continue to sit in our neck, because we can not extend this. In July 2022, the truck has to be back on the road for the two-year test for road approval.
but she trust her husband and her son to do that. the box with original wiring of the cab
the box with additional wiring for the horns, lamps, instruments , trailer etc
We hold them almost seperated
Does anybody know if this rubbermounting is still anywhere available?
also that rubber connectors for the exhaustsystem, I guess you can order seperatly the rubber and the metalclamps
Don´t find a number or a description of that part. Metalclamps are no problem to got, but these rubbers fit exactly, I could used some cutted rubber blocks - but if there anywhere is a designed sparepart, than i like to use this.
Found on the TMs following partnumbers for that:
14034504
14034503
14022537
14022538
14034501
a lot of parts appear for renew like the Shock absorbers, stabilizer bushings, steering damper, bolt, nuts, rubberparts....
It would be a waste of money and time not to do everything conscientiously here now. We have increased the budget again, as always in our projects. As a rule, the first estimate is usually only 50% of the expected volume. The time will continue to sit in our neck, because we can not extend this. In July 2022, the truck has to be back on the road for the two-year test for road approval.
Last edited:
- 462
- 968
- 93
- Location
- Germany
It looks like I will have to make this myself or I will take something from the aftermarket which I will customize
GM 14034501
Support Assembly, Exhaust Pipe
1985-1991 GM
Support Assembly, Exhaust Pipe
1985-1991 GM
Support Assembly, Muffler & Tail Pipe Front
1985-1991 GM
Support Assembly, Muffler & Tail Pipe, Right
1985-1991 GM
Support Assembly, Muffler & Tail Pipe, Left
1985-1991 GM
GM 14034501
Support Assembly, Exhaust Pipe
1985-1991 GM
- Part Description
SUPPORT, Exhaust Pipe - Manufacturer
General Motors - Manufacturer's Notes
This part is discontinued. It is no longer available for purchase.
Support Assembly, Exhaust Pipe
1985-1991 GM
- Part Description
SUPPORT, Exhaust Pipe - Manufacturer
General Motors - Manufacturer's Notes
This part is discontinued. It is no longer available for purchase.
Support Assembly, Muffler & Tail Pipe Front
1985-1991 GM
- Part Description
SUPPORT, Exhaust Muffler/Resonator - Position
Front - Manufacturer
General Motors - Manufacturer's Notes
This part is discontinued. It is no longer available for purchase.
Support Assembly, Muffler & Tail Pipe, Right
1985-1991 GM
- Part Description
SUPPORT, Exhaust Muffler/Resonator - Position
Passenger Side - Manufacturer
General Motors - Manufacturer's Notes
This part is discontinued. It is no longer available for purchase.
Support Assembly, Muffler & Tail Pipe, Left
1985-1991 GM
- Part Description
SUPPORT, Exhaust Muffler/Resonator - Position
Driver Side - Manufacturer
General Motors - Manufacturer's Notes
This part is discontinued. It is no longer available for purchase.
- 462
- 968
- 93
- Location
- Germany
There is always some gambling involved when taking apart 25 year old parts. Apart from one seal, there were fortunately no other losses here.
We descided to order a complete new seal-kit for windows and doors.
1/8 of the frame is derusted - I didn't expect to sweep so much out of the shed.... Of course there is also some dirt, but unfortunately also surface rust.
Right side is ready to weld
I could not finish the job because my son wanted to install a new door lock on his Audi and needed my assistance. Four hands were better than two in that case, i know now why. 3 hours later, we were finally ready to reassemble the completely disassembled door... or rather, the lock had to be surgically dissected free.
I need to disassembling the Chevy door less than 2 hours out of destroy anything.
We descided to order a complete new seal-kit for windows and doors.
1/8 of the frame is derusted - I didn't expect to sweep so much out of the shed.... Of course there is also some dirt, but unfortunately also surface rust.
Right side is ready to weld
I could not finish the job because my son wanted to install a new door lock on his Audi and needed my assistance. Four hands were better than two in that case, i know now why. 3 hours later, we were finally ready to reassemble the completely disassembled door... or rather, the lock had to be surgically dissected free.
I need to disassembling the Chevy door less than 2 hours out of destroy anything.
- 462
- 968
- 93
- Location
- Germany
Unfortunately, my request to the employer for a larger machine parts washer was not granted.
My wife started derusting the frame on Saturday and she is not satisfied at all! We can't get to the twisty parts
In that job i can share now my wifes expierence:
The Makita DGA517RTJ Akku was not so sucessful like the bigger 230V machine.
I thought maybe its easier for her with the smaller Makita.... wrong idea of me. After 2 hours where she than changed on the bigger she asked me how i could let her work so hard with that Baby Machine.... Women.....
So take today an offer for sandblasting the frame in next town of us
200-300 Euro for the cleaned and greasefree frame - Due to current order situation waiting time of 3-4 weeks.
Well we are flexibel - we changed from derust frame to disamble frame
Time til sandblasting will be spent on axles, cab, doors, cargobox - enough others still to do
About the exhaust-mountings:
i did not have to lost anything in trying to clean and sandblasting - saved!
My wife started derusting the frame on Saturday and she is not satisfied at all! We can't get to the twisty parts
In that job i can share now my wifes expierence:
The Makita DGA517RTJ Akku was not so sucessful like the bigger 230V machine.
I thought maybe its easier for her with the smaller Makita.... wrong idea of me. After 2 hours where she than changed on the bigger she asked me how i could let her work so hard with that Baby Machine.... Women.....
So take today an offer for sandblasting the frame in next town of us
200-300 Euro for the cleaned and greasefree frame - Due to current order situation waiting time of 3-4 weeks.
Well we are flexibel - we changed from derust frame to disamble frame
Time til sandblasting will be spent on axles, cab, doors, cargobox - enough others still to do
About the exhaust-mountings:
i did not have to lost anything in trying to clean and sandblasting - saved!
Last edited:
- 462
- 968
- 93
- Location
- Germany
if you have ordered some spareparts for your CUCV....
I would like to thank all the parcel delivery people who are doing their best to do their job quickly and conscientiously despite Corona and Christmas. International delivery in 5 days without express is great.
I would like to thank all the parcel delivery people who are doing their best to do their job quickly and conscientiously despite Corona and Christmas. International delivery in 5 days without express is great.
- 653
- 533
- 93
- Location
- Reydon, OK
Wow! I can not get parts within the USA in 5 days sometimes. USPS will haul them all over the country until they figure out where they go! Some parts I never get! UPS can lose parts too!
This does not happen all the time, but it does happen.
This does not happen all the time, but it does happen.
- 462
- 968
- 93
- Location
- Germany
it come by FedEx. This was the third order and all was fast and reliable. Shipping costs, fees and tax are high but still the summery of all 30% less as i would buy in a shop in germany.
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
WOW someone really went wild with the red paint. That cowl rust is more prevalent then most people realize. You are doing the right thing stripping everything out of that cab to do the blasting and repaint. I see guys painting entire cabs with the seatbelts and glass still attached. What a waste of time. Keep going I am watching closely. Happy Holidays.
- 462
- 968
- 93
- Location
- Germany
it was a professional painter in 1999 but done his work bad. We was on court with him and so he must done his job twice.
Nothing is more worse as a bad poor and sloppy preparatory work.
- 462
- 968
- 93
- Location
- Germany
The most importan sparepart is delivered
There was only the option to take the complete remanufactored Humvee-Engine - so I have to change some subsystems
There was only the option to take the complete remanufactored Humvee-Engine - so I have to change some subsystems
- 462
- 968
- 93
- Location
- Germany
Of course, not everything can go smoothly .... the nut welded into the profile of the cabin had come loose. I had to drill a hole to weld it there again, otherwise I could not have loosened the holder.
- 462
- 968
- 93
- Location
- Germany
Maybe this website is also interesting for others => csgparts.com
i have been looking for the specifications of a screw from the seat belt to replace it.
With the help of the NSM number (see TM 9-2320-289-20P) I was able to see the desired information on the website and can now order me a corresponding screw with the correct specifications.
i have been looking for the specifications of a screw from the seat belt to replace it.
With the help of the NSM number (see TM 9-2320-289-20P) I was able to see the desired information on the website and can now order me a corresponding screw with the correct specifications.
- 462
- 968
- 93
- Location
- Germany
The frame is ready for sandblasting so i can go on with the axles.
Start to bring them up in a good workingposition
Oil change and replacement of the oil seals were due 15 years ago for storage. We put it off until reactivation. Since there are no problems with the axle other than the oil leak, the only thing left to do is to replace the seals.
Start to bring them up in a good workingposition
Oil change and replacement of the oil seals were due 15 years ago for storage. We put it off until reactivation. Since there are no problems with the axle other than the oil leak, the only thing left to do is to replace the seals.
- 462
- 968
- 93
- Location
- Germany
If I had ordered the spare parts with the last order, the rear axle would have been ready today. Unfortunately, I noticed too late . So now I'm still waiting for wheel bearing, wheel bearing seal ring, seal stub axle and differential lock nut.
I wonder why the differential has no oil drain plug. ....
this is another loss of substance - fortunately easily replaceable - all four bolts are in this condition
I wonder why the differential has no oil drain plug. ....
this is another loss of substance - fortunately easily replaceable - all four bolts are in this condition
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
Hey if you want to do the job right and 100% I would replace the springs completely. The feel and levelness of the ride and height is like new. Face it them stock springs are sprung. They need new springs to give the factory ride height and smoothness. Good Luck. Check out these part numbers. Easter find M1008 2015 | Page 4 | SteelSoldiers