Rhino Tire Carrier - Washer Specs

[HmmwvTim]

I've got every one of those washers except the black one. That's the one I need.

Seems to be the case for most people parting together one of these. Now you know the dimensions. Would be nice if someone started to make these and sell them.

 

[Action]

Dont have the skew but it is in the grade 8 thick washer box. It will be hard to miss. As for the black one, that might have to be special ordered or custom made. I would just get a qtr inch plate and ask a machine shop to cut 2 to 2.25” outside diameter and a half inch inside diameter circle with a cnc. Might be cheap.

Might be cheap or might be an hour minimum labor.

 

[lpcoating]

What size do you want? HRS for material good enough?

 

[TNDRIVER]

got it on. Took some photos. The little mxc washer is the spacer I used so I can keep the mudflaps on the outside. It is slightly thinner than the mudflap but there is a patrusion on the bumper and the mud flaps compensates for this with a slightly hollowed out section behind the metal. That washer is 80 cents at ace hardware. The bolt that mounts the post could be a qtr to a half inch longer. I might get me a longer one. Hope this helps.
View attachment 867434View attachment 867435View attachment 867436View attachment 867437View attachment 867438View attachment 867439

My two cents for what it's worth, Tractor Supply where I live sales a "shim" in the same size as the large brass washers. Cad plated I think, stocked with the 3 point hitch goodies,they work for me.

 

[Gamble]

What size do you want? HRS for material good enough?

I think that HRS (High ?? Steel) is good enough. I need the size of the black washer. It appears to be 2inch outer diameter, 1/2 inch inner diameter, and 1/4 inch thickness.

 

[lpcoating]

Hot rolled sheet or hot rolled pickled & oiled. I'll get some lasered out. Pm me your address.

Guy

 

[Gamble]

Hot rolled sheet or hot rolled pickled & oiled. I'll get some lasered out. Pm me your address.

Guy

That's amazing. Thank you sooo much!

 

[lpcoating]

What is the diameter of the bolt?

 

[HmmwvTim]

What is the diameter of the bolt?

Not sure but it is a generic grade 8 bolt. the one that comes with the kit works but it can be a qtr to half inch longer.

 

[Gamble]

3/8 inch is the diameter of the bolt.

 

[lpcoating]

I had two versions made that I'll send. 2" & 2.25".

 

[HmmwvTim]

I had two versions made that I'll send. 2" & 2.25".


View attachment 867956

I think the 2.25 would work and look better. The brass washer will have less of an overhang. Those look amazing ^^

 

[Gamble]

I had two versions made that I'll send. 2" & 2.25".


View attachment 867956

Thats really amazing. Thank you

 

[lpcoating]

I had two versions made that I'll send. 2" & 2.25".


View attachment 867956

I still have (2) of each size. If anyone else needs one, pm me.

Guy