• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What did you do to your deuce this week?

whatadeuce

Active member
Steel Soldiers Supporter
959
38
28
Location
Loxahatchee, Florida
Hello welldigger, and I'm sure they did , but as I have moved my 20,000 pound tool shop from New York to Florida along with my two vehicles, I am still unloading and am missing many things. I would like to purchase what I need from you. Please give me your
PAYAPL info.
 

welldigger

Active member
2,602
16
38
Location
Benton LA
O sorry I don't have the parts laying around. You can get everything you need from Napa. I'll post the gasket and filter # for you tomorrow. Pm me your email and I will scan the instructions and send them to you.
 

whatadeuce

Active member
Steel Soldiers Supporter
959
38
28
Location
Loxahatchee, Florida
Yesterday I looked to see why I lost my brakes, ( and rammed and bent the fence pole in the parkibg lot) . I found alot of wetness on the rearmost axle brake backing plate and on the brake line, passenger side. " A blown brake cylinder" I said. So I pulled both tyres from that axle side ( Whew) and then asked a mechanic friend to help me pull the drum off, only to find no evidense of fluid leakage from the cylinder. We then found the leak at the brake line itself, just off the cylinder outside the backnig plate! Rerplace the line and bled with DOT 5 and Im back on the road!
 

DDurb

New member
16
0
1
Location
Buhl, MN
Being that its way too cold to play outside, I added a front winch to my Kaiser. rebuilt an old Ramsey I had in the shop,converted it to 24 volts, and installed it between the frame that had 12" extended on it. Looks pretty good sitting in place. Next weekend the wiring goes in, and a little touch up on the front end paint, and it will be good to go. I will include some pics of the finished product.

Dave
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,134
113
Location
Athens, Ga.
Battery cutoff switch in a deuce.

Started adding clearance lights to my '87 A2C.

IMAG0332.jpgIMAG0340.jpg
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,134
113
Location
Athens, Ga.
Clinto, what make and model of switch did you use?
It's a Pollak 180amp switch. Info below:

Manufacturer Part Number: 51-302, 51-302P, 51-902, 51-902P
OEM(s): Pollak
Schematic: SPST
Position Count: 2
Positions: Off-On
Terminals: 2
Voltage: 6-36V
Amperage: 180
Mounting: .75" Threaded Stem with Nut
Momentary?: No
Weatherized?: No
Lighted?: No
Self-Grounding?: No
Anti-Restart?: No

Rotating Lever Operated
(2) 3/8-24 Threaded Studs for Wire Connections
180 AMP Continuous
1000 AMP Intermittent Rating


I can send you a link to where a few are cheap if interested.
 

shenkmen

Active member
1,107
12
38
Location
Lancaster, PA
It's a Pollak 180amp switch. Info below:

Manufacturer Part Number: 51-302, 51-302P, 51-902, 51-902P
OEM(s): Pollak
Schematic: SPST
Position Count: 2
Positions: Off-On
Terminals: 2
Voltage: 6-36V
Amperage: 180
Mounting: .75" Threaded Stem with Nut
Momentary?: No
Weatherized?: No
Lighted?: No
Self-Grounding?: No
Anti-Restart?: No

Rotating Lever Operated
(2) 3/8-24 Threaded Studs for Wire Connections
180 AMP Continuous
1000 AMP Intermittent Rating


I can send you a link to where a few are cheap if interested.
Thanks Clinto. I'm interested in the link.

Thanks again.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks