deuce2
New member
- 60
- 0
- 0
- Location
- carson, nv
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
deuce2
New member
- 60
- 0
- 0
- Location
- carson, nv
Gimpyrobb, did you get that PM i sent you earlier?
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 757
- 113
- Location
- Cincy Ohio
Yup. I'll have it out when I get a chance.
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
TsgtB
New member
- 478
- 3
- 0
- Location
- Granbury, Tx
Made 3 trips to the brush/tree disposal site. First load of brush had to be unloaded by hand...
Then I figured i'd do a "dead head" (or whatever it's called), by wrapping a chain around a 4" log (about 4' long).
Buried near the cab, and let them brush site boys tug it out with their skid steer.
AMAZING, the entire load slid right out...
So I came home and loaded up the last load. DONE.
I was careful not to get the big limbs near the bench legs, but WOW... what a time saver.
Then I figured i'd do a "dead head" (or whatever it's called), by wrapping a chain around a 4" log (about 4' long).
Buried near the cab, and let them brush site boys tug it out with their skid steer.
AMAZING, the entire load slid right out...
So I came home and loaded up the last load. DONE.
I was careful not to get the big limbs near the bench legs, but WOW... what a time saver.
Another Ahab
Well-known member
- 18,007
- 4,578
- 113
- Location
- Alexandria, VA
That's slick!
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
that is posts 88-97 in http://www.steelsoldiers.com/showthr...eservoir/page3
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
Bolted down the batteries, it says to check 'em every day. I don't even see the truck every day.
Made a poor mans hold down and refurbished the connections.
I found that charging batteries with out ALL the cables OFF is bad and more bad and costs $$ and time. Can fault the alternator regulator and or the dash gauge too. No I don't know how but I know it can.
Made a poor mans hold down and refurbished the connections.
I found that charging batteries with out ALL the cables OFF is bad and more bad and costs $$ and time. Can fault the alternator regulator and or the dash gauge too. No I don't know how but I know it can.
Last edited:
Another Ahab
Well-known member
- 18,007
- 4,578
- 113
- Location
- Alexandria, VA
I found it the first time, but now the link has gone dead.
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
fresh link
http://www.steelsoldiers.com/showthread.php?42401-Remote-Brake-Fluid-Reservoir/page3
It is in
Thread: Remote Brake Fluid Reservoir
http://www.steelsoldiers.com/showthread.php?42401-Remote-Brake-Fluid-Reservoir/page3
It is in
Thread: Remote Brake Fluid Reservoir
Last edited:
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
sometimes must search by title
url's do not like cut and pasting
farticles get in there
search
brakes, reservoir, fluid, sight glass, deuce, M35A2, Deuce
and Thread: Remote Brake Fluid Reservoir
url's do not like cut and pasting
farticles get in there
search
brakes, reservoir, fluid, sight glass, deuce, M35A2, Deuce
and Thread: Remote Brake Fluid Reservoir
deuce2
New member
- 60
- 0
- 0
- Location
- carson, nv
So i took the deuce apart today to correct the timing. Here are some pics of the process.
deuce2
New member
- 60
- 0
- 0
- Location
- carson, nv
deuce2
New member
- 60
- 0
- 0
- Location
- carson, nv
I have to give a great many thanks to gimpyrobb for helping me out over the phone to figure out what i did wrong the first time. I installed a new IP about a month ago, and couldn't figure out why it was running rough. Found out today my timing was off. After pulling the valve cover to insure i was on tdc number one, i proceeded to remove the gear drive on the IP. Lined up the three marks as shown in the pics. Put everything back together as well as new rad hoses. The first try, she fired right up with no issues. I can now drive over 20mph, and she doesn't smoke white, or sputter at all.��
deuce2
New member
- 60
- 0
- 0
- Location
- carson, nv
Now that I know how to fix this issue, I would gladly help anyone who is having timing issues.
Another Ahab
Well-known member
- 18,007
- 4,578
- 113
- Location
- Alexandria, VA
The stencil on the inside of the hood is a nice item (for lots of reasons).
Did the stencil come with the rig as purchased, or did you add it?
deuce2
New member
- 60
- 0
- 0
- Location
- carson, nv
The stencil was definately part of the rig.
- 6,619
- 14,091
- 113
- Location
- Hawthorne, NV.
Started installing the standard Garwood winch yesterday. Have been taking some pics as I go, and will post some when I get back from the sandblaster tomorrow. So far so good.
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
The under/inside the hood stencil not used during WWll
In google books it will let you see where that came from.
Me thinks lots of people got hurt. Maybe other posters can say when the hood to cowl latch was incorporated.
goto
https://books.google.com/books?id=L...=onepage&q=safety stencil inside hood&f=false
that should show you page 496 and others
It is from a book STANDARD CATALOG OF US MILITARY VEHICLES 2end edition
David Doyle October 2003
ISBN:0-87349-508X now trending at (and selling good) at 44 bucks on a popular auction site.