• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your 5 ton this week?

5TID

5TID

Well-known member
74
278
53
Location
Boise, ID
Weldman said:
Got more pictures of the engine? On the 6CT 8.3 the engine coolant block heater goes on the right front, that is the right back from what I can see by where the starter is in the picture. So that is not a 8.3 Cummins. Not a bad thing it's not, actually if correct it can be either a 350 or 400 BC which means way more power, the identification will be on the left front timing cover towards the fan.
Click to expand...

Looks like it is a 6CTA from the engine tag. I did hear a rumor that the power was turned up from this number due to the extra weight of the ROPS cab. Not sure how true that is.

IMG_20221112_094053.jpg
IMG_20221112_094058.jpg
 
Jbulach

Jbulach

Well-known member
Steel Soldiers Supporter
2,672
2,220
113
Location
Sunman Indiana
Weldman said:
Alright I dropped the old T stat in boiling water and it opened, so I have my head scratching. Did these 5 tons come with a extra cooling capacity for desert operations? No the fan clutch isn't stuck on either.
Mine was built in 91 the cooling system was redone in 94 according to the stenciling on the cooling parts and of course there MWO tags as one opens the doors but are covered in paint.
Click to expand...
Are you fighting low or no heat in the cab, If so have you checked flow through the heater core? If poor or none make sure the valves at the block are open and not plugged and try flush the core then reverse the lines to help dislodge debris. Also a complete cooling system flush is probably needed if the core is full of junk. Flushes are tuff to do thoroughly in the winter though because you cant get the thermostat to open quickly, and risky to work it up to temp in sub-freezing conditions on straight water.
 
simp5782

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,130
9,408
113
Location
Mason, TN
Weldman said:
Someone purposely blocked the heater core off as I found out after ripping the lines off for the reason of a leaking heater core. I will rip it out later and solder the holes if I can. Dealing with low heat on the engine mostly of only 130 degrees, but seems from the design in below freezing temperatures this is inevitable unless one blocks the radiator off.
Click to expand...
The 6ctas had dual thermostats as well.

There is a winter front kit for the 939s

They also have a diesel fired heater in place of the stock unit for the extreme cold

www.ebay.com

Swingfire Heater Kit/M939/M939A1,5-ton, 2540-01-182-1077 | eBay

Swingfire Heater kit/M939/M939A1,5-ton. Swingfire Heater kit for M939/M939A1, 5-ton 6X6 military truck, with a NHC250 Cummins 6 cylinder diesel. Hundreds of small parts. designed to pre-heat your radiator fluid in engine, in the field where electricty or remoteness of location prohibities use...
www.ebay.com
 
You must log in or register to reply here.
111,199members
165,491threads
2,328,890posts
1,761online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks