Ilikemtb999
Active member
- 701
- 45
- 28
- Location
- Denver, CO
Installed an hmmwv throttle control. Was fairly straight forward with a few holes drilled.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your CUCV today/lately - Part 2
- Thread starter Warthog
- Start date
Assel
Member
- 197
- 7
- 16
- Location
- Germany Schwarzwald-Baar
Today I checked all fluids & batteries, then went for a snow drive https://www.youtube.com/watch?v=bSBqZhO-fac&feature=youtu.be
while I was on the way I did some grocerie shopping aswell... CUCV was the best attraction on the parking lot
while I was on the way I did some grocerie shopping aswell... CUCV was the best attraction on the parking lot
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
Does that have LED headlamps?
Assel
Member
- 197
- 7
- 16
- Location
- Germany Schwarzwald-Baar
No, in the headlamps I´ve put some Phillips +60% bulbs , they work fine for me. (Im not 100% sure if its really phillips but im sure it said +60% on the package...is like 2 years ago that i`ve replaced the old ones)
I doubt LED headlamps are legal here in germany ....
I doubt LED headlamps are legal here in germany ....
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
Why is the wait lamp flashing?
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
She cranked right up, like a champ!
- 890
- 1,332
- 93
- Location
- Rhein-Main Area, Germany
I think he has the glow plug controller card from antennaclimber......with this card you have the choice between flashing and steady light.....
Kaiser67M715
Member
- 699
- 26
- 18
- Location
- NH
More info please, didn't see anything on this with a quick search.
Sent from my iPhone using Tapatalk
- 1,370
- 960
- 113
- Location
- State College, PA
- 890
- 1,332
- 93
- Location
- Rhein-Main Area, Germany
BTW....I have it also, works great
Ilikemtb999
Active member
- 701
- 45
- 28
- Location
- Denver, CO
The NSN # is 2910-01-466-6264. The instructions are for an hmmwv but was pretty easy to figure out. Mounts to the bracket that holds the throttle cable and pedal and then I snaked the cable under the dash and mounted the knob to the left of the steering wheel on the steering column cover.
Kaiser67M715
Member
- 699
- 26
- 18
- Location
- NH
Ilikemtb999
Active member
- 701
- 45
- 28
- Location
- Denver, CO
I can snap a picture of the throttle cable mount area later and add it
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 757
- 113
- Location
- Cincy Ohio
Ha! I have a ton of those cables, no bracket though.
Ilikemtb999
Active member
- 701
- 45
- 28
- Location
- Denver, CO
The whole kits go for cheap brand new on that popular auction site. The cables are a neat design
- 1,512
- 1,696
- 113
- Location
- Puget Sound, WA
I wouldn't mount anything there; there's a reason that panel is smooth the way it is. It can change a minor accident from a walk-away-with-some-scratches thing to permanent disability. Just my two cents...
- 2,011
- 73
- 48
- Location
- Orlando, FL
I really like your idea of adding a HMMWV throttle control, Ilikemtb999! ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
I use an aluminum baseball bat as a hand throttle, I have a backup hand throttle - a metal handle from a small push broom. Both work for now, but someday I may follow in your footsteps. Please post more pictures of how you attached the throttle cable to the pedal.
With all due respect, I agree with Mainsail. Been there, done that, got the t-shirt. I literally walked away from a very bad 65 MPH combined speed head-on collision. I was in a 1987 Dodge Diplomat. No air bag (thank God). I hit an SUV. My knees cracked the dashboard. I needed 9 stitches above my left eye from my head bouncing off of the steering wheel. I had no broken bones, but I had severe internal bruising, bruised sternum, ribs, lungs, knees, arms, etc. The cut on my eyelid was very close to my eye. It's a miracle that I didn't lose the ability to see out of my left eye. The investigating officer on scene wrote that there should have been a fatality (me).
Any major accident will cause your body to rapidly head towards the dash, even with a seat belt. The curved dash directs your legs downward. The location of the throttle control is bad. Very bad. The throttle control will become embedded in your knee or leg. It might break bones, sever tendons, or wreck cartilage. Worst case your femoral artery is punctured and you bleed out REALLY quick.
I use an aluminum baseball bat as a hand throttle, I have a backup hand throttle - a metal handle from a small push broom. Both work for now, but someday I may follow in your footsteps. Please post more pictures of how you attached the throttle cable to the pedal. With all due respect, I agree with Mainsail. Been there, done that, got the t-shirt. I literally walked away from a very bad 65 MPH combined speed head-on collision. I was in a 1987 Dodge Diplomat. No air bag (thank God). I hit an SUV. My knees cracked the dashboard. I needed 9 stitches above my left eye from my head bouncing off of the steering wheel. I had no broken bones, but I had severe internal bruising, bruised sternum, ribs, lungs, knees, arms, etc. The cut on my eyelid was very close to my eye. It's a miracle that I didn't lose the ability to see out of my left eye. The investigating officer on scene wrote that there should have been a fatality (me).
Any major accident will cause your body to rapidly head towards the dash, even with a seat belt. The curved dash directs your legs downward. The location of the throttle control is bad. Very bad. The throttle control will become embedded in your knee or leg. It might break bones, sever tendons, or wreck cartilage. Worst case your femoral artery is punctured and you bleed out REALLY quick.
Ilikemtb999
Active member
- 701
- 45
- 28
- Location
- Denver, CO
Ya know, not something I put any thought in to. The placement was mainly dictated by the cable length. I may see if it'll work somewhere in the middle area of the dash. It's not something I need quick access to as if I'm using it I'll most likely be stuck and winching.
- 2,011
- 73
- 48
- Location
- Orlando, FL
Will the cable fit in the left radio knob hole? If you move the cable to that hole, will it reach the throttle pedal bracket?
Ilikemtb999
Active member
- 701
- 45
- 28
- Location
- Denver, CO
The cable is too long to put on the right side of the column in the same space so not sure if slightly higher would work. Once it warms up a bit outside I'll get out there and see if it could snake up under the dash a bit more and see. Was also thinking the ash tray area might work.