gottaluvit
Well-known member
- 1,786
- 28
- 48
- Location
- Bethesda, OH (AKA: Flyover Country)
No pictures?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your CUCV today/lately - Part 2
- Thread starter Warthog
- Start date
computer54
Member
- 317
- 1
- 18
- Location
- Nashville,TN
Sorry now hear is you want more let me know.
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
I had a friend stop by and ask if I could check his glow plugs. No problem. I pulled them all out and bench tested them like I always do. 
I used the old battery charger test method and all 8 worked but 1 had a strage way of getting hot. It got hot back at the threads and at the tip. I could smell plastic burning when it got hot. I got it real hot just to show the burn pattern. No flash lights out.
Can you see the hot at both ends and not in the middle? He started it with magic spray to get here and I replaced 1 glow plug and he was here a few hours messing around and when he went to leave the wait light came on and it started right up. That was easy. next week we would like to put this fuel pump on. It would be the pump and filter all in one easy to maintain assembly. 
Not sure what it was made for but it was in a box of parts a friend gave me. That glow plug getting hot at both ends is a prime example of why I always remove the glow plugs to test them. This is not the first time I have encountered this. It don't take me but about 15-20 minutes to R & R the glow plugs and replace the ones that are bad only.
Last edited:
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
Thanks for the pics. You planning to paint it and bring it back in desert tan, or you thinking another color?
gottaluvit
Well-known member
- 1,786
- 28
- 48
- Location
- Bethesda, OH (AKA: Flyover Country)
Cool in tan. Even has a pintle hook.
computer54
Member
- 317
- 1
- 18
- Location
- Nashville,TN
Tan and I went back up to KY. to get a M105a2 trailer . It pulled it wit no problem and I have it hear at home.
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
That'll be a sweet combination, for sure.
computer54
Member
- 317
- 1
- 18
- Location
- Nashville,TN
yes and it has the top too and wood side rails.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Today I got the truck out for a test run of a couple things.
Stereo tuned for best listening experience, carburetor tuned to run with the new filter and new fuel return line so no more over fueling, and then I bout ran out of gas. Luckily I always keep a few cans full at the shop. Turned around went back, dumped one in and all is well.
Tomorrow I have a long hard run to make up to Nashville TN hopefully all will go well.
Stereo tuned for best listening experience, carburetor tuned to run with the new filter and new fuel return line so no more over fueling, and then I bout ran out of gas. Luckily I always keep a few cans full at the shop. Turned around went back, dumped one in and all is well.
Tomorrow I have a long hard run to make up to Nashville TN hopefully all will go well.
computer54
Member
- 317
- 1
- 18
- Location
- Nashville,TN
That is were I live. and here is some pictures of the trailer too.
rustystud
Well-known member
- 9,298
- 3,072
- 113
- Location
- Woodinville, Washington
That fuel pump looks like an old 1960's to 1970's Chevrolet. I always like that style.
computer54
Member
- 317
- 1
- 18
- Location
- Nashville,TN
1958 to 1960
gottaluvit
Well-known member
- 1,786
- 28
- 48
- Location
- Bethesda, OH (AKA: Flyover Country)
Is that another M105 behind that 1st pic?
Also, if the end curtain is coming off you could attach it directly to the bow with screws and large washers with small holes. I did that to two of mine and they are holding well.
Last edited:
computer54
Member
- 317
- 1
- 18
- Location
- Nashville,TN
it is but look in govplanet.com and check KY. and yes but the one I got had a new cover and side rails on it. But they (Army) did not but the cover on right, I got it home and but on right. and the other trailer was a 105 but was sold to some one else.
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
I think the fuel pump may be for a Hyster forklift from the 60's. I found a lot of Hyster Challenger parts in the boxes.
rustystud
Well-known member
- 9,298
- 3,072
- 113
- Location
- Woodinville, Washington
If you research it a little more you will see they did use this style up to the 1970's.
lostinutah
Member
- 56
- 0
- 6
- Location
- pleasant grove, utah
Swapped gen 2 alternator, serviced throttle shaft o rings (fixed my hard starts), doghead starter relay, ran 12v bus behind glove compartment for radios, soldered old radiator and replaced leaking one, swapped new aluminum heater core for the original from my 85 (blows hot now), installed mushroom intake on the hood, new brakes, and hood pins. Was a fun few days.
lostinutah
Member
- 56
- 0
- 6
- Location
- pleasant grove, utah
Been riding for a few days. As I posted before the hard starts are almost nill, if I keep the fuel above 1/4 tank. But I am still having a loss of power uphill. And it is drastic. How can I test my injectors to see if they need replaced? I bought a laser thermometer, what are the normal readings/where I should look for at the engine? ......Oh yeah, and I got stuck in 6ft of snow. I thought it was hard packed...I was wrong. Sunk a couple feet and a sheriff helped snach me out. Man I love getting stuck.
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
What was the vehicle he drove that snatched you out?
Last edited:
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
I would take a look at the fuel filter or the sock in the fuel tank. The above pictures show what I found in my filter. I had slight sluggish acceleration and that was the root cause. Simple fix. It runs like a totally different vehicle now.