Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I managed to get a spare tire carrier with three bent pins and no bracket. I looked at all the photos on the internet and drew the bracket in Solidedge, cut it out, and welded it together. I straightened the least bent pin.
View attachment 886243
I just need to get the squared locking pins.
Can someone tell me what the original dimensions are?
We're in Miami for the holidays, so I already have a long list of things to get.
My wife has no idea that we will be a little overweight on the way home!
[/QUOTEAbout 3 inches ( 2 x3/4 would work) from head shoulder to tip, 1 and 1/2 inch between the wire to pin. 2 different diameters, the smallest available at tractor supply for the wrench handle (1/4 inch) The bracket appears to be 5/16 or 3/8 dia. It's pouring rain here or I would be more precise. Any farm implement dealer stocks this stuff. If I remember correctly these shops are congregated out north of the airport.
Is this the doo hickey for the Rhino.I managed to get a spare tire carrier with three bent pins and no bracket. I looked at all the photos on the internet and drew the bracket in Solidedge, cut it out, and welded it together. I straightened the least bent pin.
View attachment 886243
I just need to get the squared locking pins.
Can someone tell me what the original dimensions are?
We're in Miami for the holidays, so I already have a long list of things to get.
My wife has no idea that we will be a little overweight on the way home!
Does the Noco put off enough heat to require venting? Have you placed a thermometer. A guy with a rare hummer H1 just burned to the ground due to a trickle charger of all things.Added a NOCO dual battery charger and inlet on the battery box (so you dont have to remove the passenger seat to charge it).
As a bonus, I wired in the block heater to the inlet, and added a switch to turn the block heater on and off.
View attachment 887128
View attachment 887129
What model NOCO did you get? Since I don't know....this will work OK if the batteries are hooked up in series?Added a NOCO dual battery charger and inlet on the battery box (so you dont have to remove the passenger seat to charge it).
As a bonus, I wired in the block heater to the inlet, and added a switch to turn the block heater on and off.
View attachment 887128
View attachment 887129
Something must have gone way wrong for a fire to happen IMO. Something probably short circuited. I have not measured any temperatures but this is the same charger that I used on my last humvee, and I left that one plugged in 24/7 for about a year with no issues.Does the No I put off enough heat to require venting? Have you placed a thermometer. A guy with a rare hummer H1 just burned to the ground due to a trickle charger of all things.
NOCO Gen 5x2. Its designed to work with batteries whether they are series, parallel, or on separate circuits. I conformed this with NOCO.What model NOCO did you get? Since I don't know....this will work OK if the batteries are hooked up in series?
The GEP18002668 plugs went in today after yesterday's no-start.i just personally haven’t seen AC15G’s in years, maybe they are back in production, the Govt doesn’t use them, OEM plugs are made by Wellman.
There is a new plug out now made in Germany for GEP, HPG sells them, part no. GEP18002668-8
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!