-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your MTVR today?
- Thread starter Elijah95
- Start date
MTVR
Well-known member
- 698
- 748
- 93
- Location
- Waco Texas
The bed is about 5'6" tall, so you should be good for the western U.S., as long as you don't install any solar panels or roof vents.
MAdams
Active member
- 380
- 132
- 43
- Location
- San Dimas, CA
Damn! My math says that's about 12,000 lbs
Sent from my SM-G975U using Tapatalk
Sent from my SM-G975U using Tapatalk
- 7,724
- 19,775
- 113
- Location
- Charlotte NC
The more I see it, the more I really LIKE that truck... I can't quite put my finger on it. Is it cause it's big? Or maybe because it is BIG?
Fixed my ac, hallelujah! I’ll upload a video update
Sent from my iPhone using Tapatalk
. Or maybe because it is 25 about years newer than my 5 Ton maybe. You could just about fit a Deuce in the bed of your truck... Still can't quite figure out why everything has to have an automatic transmission though. Seems like just one more thing made more complicated than it needs to be. Especially for their intended purpose.
MTVR
Well-known member
- 698
- 748
- 93
- Location
- Waco Texas
What was wrong with your A/C?
Haha it’s growing on me! I didn’t like the auto too much in my old 5 ton, but this one has pretty good shift logic and I have all the software to play with it so I’m relatively happy. It is nice off-road that’s for sure although I still prefer shifting my own gearsThe more I see it, the more I really LIKE that truck... I can't quite put my finger on it. Is it cause it's big? Or maybe because it is BIG?
Still can't quite figure out why everything has to have an automatic transmission though. Seems like just one more thing made more complicated than it needs to be. Especially for their intended purpose.
@MTVR if you watched a couple of my previous videos, I had issues with the fan not cycling with the ac on, pushing head pressure too high
Sent from my iPhone using Tapatalk
- 284
- 234
- 43
- Location
- Herriman UTAH
I was poking around the other day and I found an emissions sticker on the engine. GP says there is no emissions sticker so maybe this one is not "official". To be official, maybe it needs to list the amount of pollution or something. Anyway, if you are in a state were emissions are required, you can point to this. It is on the driver's side and above the ECM.
- 284
- 234
- 43
- Location
- Herriman UTAH
I replaced the air hoses for the driver's air ride seat. I replaced the switch but the air hoses would pop off sometimes so I replaced them both with new.
- 284
- 234
- 43
- Location
- Herriman UTAH
I also fixed two blue air hoses that were cracked and leaking. I have no idea what they are for because the truck worked fine even though they were leaking. They are next to the power steering reservoir under the hood.
- 284
- 234
- 43
- Location
- Herriman UTAH
Congratulations!!!
Monkeyboyarmy
Well-known member
- 1,337
- 194
- 63
- Location
- Kingsville,Oh.
After a 3 month wait and thanks to Wes, mine is finally headed east. Lots of work ahead.
Attachments
JW7tonWY
Active member
- 104
- 144
- 43
- Location
- Central Wyoming
Picked up my MTVR Monday, Drove it home to WY, from Yermo, CA. Arrived early today having had a relaxed two day trip...and no issue occurred. I wanted to share this link, https://www.amazon.com/gp/product/B0130JBEZ2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 I bought several types of this and this is the stuff for your gun turret cap. Put it on the lip of the roof put the cap on and all the locking brackets fit perfectly. No rattle no leaks. When i drove it off the lot the rumble of the engine caused the lid to resonate like a drum skin over my head thought I was going to die. Got out my rolls of rubber trim and this stuff went on with the right amount of effort to stay had the right height and all. nearly 1000 miles home no noise from that lid.
MTVR
Well-known member
- 698
- 748
- 93
- Location
- Waco Texas
Thank you...
Pics or it never happened.
JW7tonWY
Active member
- 104
- 144
- 43
- Location
- Central Wyoming
.
Yermo, somewhere NV, rest area in WY, At home with my Jeep M715, and in Rawlins at a pit stop