Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
What is the function of this? Would it stabilize the missile to be handed to the gunner above?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What is the function of this component inside the TOW missile trucks
- Thread starter Gamble
- Start date
What is the function of this? Would it stabilize the missile to be handed to the gunner above?
BLK HMMWV
Well-known member
- 1,577
- 497
- 83
- Location
- Pasadena California
The T&E mechanism mounts/stows there.
When not mounted to a similar bracket on the roof.
BLK HMMWV
Well-known member
- 1,577
- 497
- 83
- Location
- Pasadena California
Missiles are to long to pass up through turret whole. they I believe were passed from rear hatch opened from the top latch and pivoting on the lower pivot points. Think rumble seat on old cars
- 4,763
- 1,164
- 113
- Location
- Gaithersburg, MD
I used to have an M1045 with that same TOW mounting point, as well as the missile racks (my truck also had the TOW wiring harness hung off a mounting point on the B-pillar). The racks took up the entire bed beneath the rear hatch.
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
T&E =???
- 4,763
- 1,164
- 113
- Location
- Gaithersburg, MD
I think that mounting point was where the TOW launcher was stored when in transit. As I said, "I think" this is how it worked. I hope someone who served can confirm this.
- 4,763
- 1,164
- 113
- Location
- Gaithersburg, MD
Come to think of it, maybe BLK HMMWV already stated it.
- 5,368
- 3,378
- 113
- Location
- Lexington, South Carolina
Traversing and Elevating.
BLK HMMWV
Well-known member
- 1,577
- 497
- 83
- Location
- Pasadena California
Yes Traverse and Elevation Mechanism.
Your base plate in your picture looks like the part on the far left with the exception your part is bolted to a mounting bracket to allow it to attach to the floor of the HMMWV. Then you have a coupling piece to clamp the T&E mech Far right part to either the mounting plate up on the top of turret or stowage bracket inside HMMWV. Last picture is the 3 parts together
M1165A1
Well-known member
- 413
- 859
- 93
- Location
- The High Country, CO
My HMMWV needs a T&A upgrade?
BLK HMMWV
Well-known member
- 1,577
- 497
- 83
- Location
- Pasadena California
You might need to find a Female Commander.
But nowadays you can probably go in for the upgrades to your chassis, and get away with it.
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
IOW, it held either a belt-fed or other such gun.
dg
dg
Crapgame
Well-known member
- 635
- 329
- 63
- Location
- Navarre, FL
The Special Forces GMV Humvees repurposed the bottom bracket under the flange mount to hold a twin 7.62mm 200rd Ammo Can, for the Navigator's M240 on swing arm mount and cradle:
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
One things for sure, that piece is extremely challenging to remove.