Wheel cylinders in M35's

[wiggall]

How hard is it to rebuiled M35 wheel slave cylinders?

 

[m715mike]

I know that @texas30cal has rebuilt them without issue.

They are relatively inexpensive, so I usually just buy new ones.

 

[porkysplace]

Not hard unless they are pitted .

 

[18operator]

Sometimes it's harder to find the rebuild kit than it is to rebuild the unit.

 

[Barrman]

Super easy to rebuild or replace. Since so much effort is needed to get to them and I have 2 trucks. I bought several replacement wheel cylinders and a half dozen or so rebuild kits. That way I can just swap leaking ones out hole and rebuild later to always have a few ready at any time.

 

[rmesgt]

Can someone please post a source and part number for the wheel cylinders? Thanks in advance....

 

[gringeltaube]

Can someone please post a source and part number for the wheel cylinders? Thanks in advance....

BRAKE WHEEL CYLINDER, M35 | White Owl Parts Co.

- 2530-00-274-4511 - ONE PER WHEEL - SIX PER TRUCK | White Owl Parts Co.

whiteowlparts.com

 

[Mullaney]

Can someone please post a source and part number for the wheel cylinders? Thanks in advance....

.
As @gringeltaube offered, White Owl is a good source!
First Class people and place to do business...

.

 

[Tracer]

Another source is NAPA, the complete wheel cylinder is Part #4419. My NAPA dealer is about a 1/4 mile away. So, I buy the wheel cylinder (China) and a rebuild kit for that wheel cylinder (USA) and change out the internals, so all I use is the wheel cylinder body and bleeder valve everything else is USA parts. I don't have the Part # for the rebuild kit but NAPA has them. As m715mike posted these parts are not expensive and from NAPA they are new. I have had some problems in the past with NOS parts leaking after a few months, you don't know how long they have been sitting on the shelf. Hope this helps.