• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Working On The M561 Gama Goat

mkcoen

mkcoen

Well-known member
Steel Soldiers Supporter
5,637
381
83
Location
Spring Branch, TX
For those reinstalling your engines I highly recommend you put all the radiator support items back on BEFORE putting the motor in. You don't have to put the radiator in but the side pieces to the support at proving to be a pita. The bottom of the support bolts in to the bottom of the cross bar holding the radiator. It's a very tight, angled area and with no feeling in my finger tips I've spent about an hour trying to get 1 bolt started.
 
M813rc

M813rc

Well-known member
Steel Soldiers Supporter
4,218
3,262
113
Location
Near Austin, Texas
When you run into a green that is "almost 383 green, but not quite" on equipment, it is likely 34079 Forest Green. It is the normal factory green for antenna bases, gun mounts, and other equipment (post-OD period).
It is the dark green used in the MERDC camo (also USAF aircraft, and airfield support gear in 24079 guise), available from Rapco and others.

Cheers
 
mkcoen

mkcoen

Well-known member
Steel Soldiers Supporter
5,637
381
83
Location
Spring Branch, TX
M813rc said:
When you run into a green that is "almost 383 green, but not quite" on equipment, it is likely 34079 Forest Green. It is the normal factory green for antenna bases, gun mounts, and other equipment (post-OD period).
It is the dark green used in the MERDC camo (also USAF aircraft, and airfield support gear in 24079 guise), available from Rapco and others.

Cheers
Click to expand...
What's currently on there is lighter than that. More like really faded 383. I'm going to concentrate more on getting it back together and less on how it looks. I prefer driving it more than staring at it.
 
combat32

combat32

Well-known member
1,639
106
63
Location
Booneville AR.
mkcoen said:
CRS is one of the many side affects of MS so you'll need to remind me to remind you in 30 days. Likely I'll still be working on that bolt.
Click to expand...
They left most of those bolts out of mine, guess the last mechanic who worked on it decided they were too hard to get to and not real necessary.
 
Keith_J

Keith_J

Well-known member
3,657
1,323
113
Location
Schertz TX
mkcoen said:
CRS is one of the many side affects of MS so you'll need to remind me to remind you in 30 days. Likely I'll still be working on that bolt.
Click to expand...
Cannot be any more difficult than the nuts holding a CUCV injection pump onto the timing chain cover ;)

If you need me tomorrow, the wife is working so I have a kitchen pass.
 
mkcoen

mkcoen

Well-known member
Steel Soldiers Supporter
5,637
381
83
Location
Spring Branch, TX
Well it's alive again. The mrs tried getting those bolts in I spent an hour on and had the exact same luck - none. When Keith_J got here today we spitballed a couple of different ideas and then he suggested putting the bolts in without the panels and just slotting the bottom of the panel so we could slide it over the bolts already in place. Worked like a charm.

We also got the new oil filter adapter and canister installed, filled all the fluids, put the batts back in and it fired just as quick as the old one. Only issue that came up was a Class 3 oil leak at the oil pressure sending unit. It was the line coming out of the block to the sender so we just pulled the one off the old engine (it's nice having extra parts) reinstalled it and everything's fine again.

Still need to bleed the brakes before we can road test it but that should be on Monday.

image.jpg
 
Keith_J

Keith_J

Well-known member
3,657
1,323
113
Location
Schertz TX
The oil pressure sending unit line is like all other compression fittings on the 561, something odd and proprietary as it has coarse threads and a unique ferrule. It leaked as it has a limit to compression and the tube was compressed too much.
 
Keith_J

Keith_J

Well-known member
3,657
1,323
113
Location
Schertz TX
At least the spin on oil filter adapter didn't leak ;).

I have been looking all morning for those compression fittings online...no luck :(
 
frenchman

frenchman

New member
62
2
0
Location
sacramento california
do not take any short cut on the break do it right the 1st time other wise you will have to go back to it and dont forget to remove the 2 rubber washer with a small hole in it on the side of the master cylinder leave the spring and metal washer inside that will prevent wheel lock up it happen to me when i restored my goat
frenchman
 
Gamagoat1

Gamagoat1

Active member
746
44
28
Location
Kiowa, Colorado
You can see those little steel tubes I was telling you about, in the water holes. They are designed to lesson the possibility of erosion to the block top by the water flow. When you order the gasket set be sure to tell them it's the aluminum block. They will say, HUH? The right gasket set will have new steel
tubes and silicone tubes to put them in.
 
mkcoen

mkcoen

Well-known member
Steel Soldiers Supporter
5,637
381
83
Location
Spring Branch, TX
Gamagoat1 said:
You can see those little steel tubes I was telling you about, in the water holes. They are designed to lesson the possibility of erosion to the block top by the water flow. When you order the gasket set be sure to tell them it's the aluminum block. They will say, HUH? The right gasket set will have new steel
tubes and silicone tubes to put them in.
Click to expand...
I'm not rebuilding this one. It's going to be carved up and sent to 2 other Goats in progress. I'll let my misfortune be to someone else's benefit. Of course if any extra soft top hardware is floating around I wouldn't be against using these as collateral.
 
You must log in or register to reply here.
110,898members
165,318threads
2,326,316posts
1,749online users
Top