- 4,038
- 119
- 63
- Location
- Ponchatoula LA
lets start up the swap tread. post up what you are looking for and what you have for sale
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2016 la rally swap, buy, sell, wanted tread
- Thread starter timntrucks
- Start date
Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
I have a bunch of crap, will trade for a bunch of junk. Even swap.
goldneagle
Well-known member
- 4,509
- 1,006
- 113
- Location
- Slidell, LA
I got ammo cans (120mm and 81mm) Also tow bar feet for the medium/heavy tow bar. Should also have some tires available. 5 ton dash panels and switches. Will add more stuff later.
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
I have lots of wrecker BII many oxygen and acetylene tanks both fillable and just show, lots of pulleys double and single and 3/4" chains, 5' railroad type pry bars, cabs and parts of cabs outrigger legs and land anchors, and lots more just ask
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
Set of 2 3/4 new nos tow bar pins with wire rope retainer and keeper pin $25
Attachments
Last edited:
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
Tire Carrier complete off my M923- Tan for the 1100x20. In good shape, I am switching to the super singe carrier. I can bring to rally or pup in Metairie. $150
goldneagle
Well-known member
- 4,509
- 1,006
- 113
- Location
- Slidell, LA
I will have some DELTA PRO underbed tool boxes available for sale. 36" x 12" x 14" tall.... Also a M105 trailer. Some wrecker vise plates, 1 super sized wrecker vise, MRAP seats, complete driver's side door for 5 ton or M35 in very nice shape, some trailer axles, 2 MRAP rims? Medical cabinets, soft-top frame set (no top), Onan 3000 watt RV generator, Wilton 6" bench vise, Panasonic power tools,
Dock Rocker
Active member
- 980
- 72
- 28
- Location
- Jackson ms
What's the story on the mrap seats? Are they the ones that recline? How many do you have?
goldneagle
Well-known member
- 4,509
- 1,006
- 113
- Location
- Slidell, LA
I have a couple of dozen seats. They fold like movie theater seats. (The bottom folds up and the back is stationary) There are 2 styles of seat belts for these seats.
Attachments
Dock Rocker
Active member
- 980
- 72
- 28
- Location
- Jackson ms
Goldneagle I sent you a PM
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
Update I am bringing
I got 4-1400/20 mounted on custom rims for deuce(bobbed) was on my truck at Georgia rally $750, a few 100 amp 24volt alternators new in box $100, a few HMMWV AC condensers,evaporators, and compressors only, No hoses or dryer 250$ for set, new MBU compressors $25, A new 5 ton power steering pump think its for a A1 but I need a A2 pump want to trade if possible. Want to buy rear drive shaft hanger bearing for M927A2 if anybody has one will post pictures later. Also have a decent used MKT oven $25. MV truck tool boxes? $50.
Just looked at alternator they are 130 AMP I need glasses bad.
Marty
update on what's coming with me---
So far I am bringing-
csm Davis-2 alternators and 2 MV step boxes
tim-1 toolbox 1-mkt
juan- 1 alternator
goldeneagle- 1 ac kit
hanks duece - 1 freebie rim
also thrown in trailer-extra air conditoner set,duece secondary filters@5$,in tank pumps-50$,power steering pump for 5 tonA1?
I got 4-1400/20 mounted on custom rims for deuce(bobbed) was on my truck at Georgia rally $750, a few 100 amp 24volt alternators new in box $100, a few HMMWV AC condensers,evaporators, and compressors only, No hoses or dryer 250$ for set, new MBU compressors $25, A new 5 ton power steering pump think its for a A1 but I need a A2 pump want to trade if possible. Want to buy rear drive shaft hanger bearing for M927A2 if anybody has one will post pictures later. Also have a decent used MKT oven $25. MV truck tool boxes? $50.
Just looked at alternator they are 130 AMP I need glasses bad.
Marty
update on what's coming with me---
So far I am bringing-
csm Davis-2 alternators and 2 MV step boxes
tim-1 toolbox 1-mkt
juan- 1 alternator
goldeneagle- 1 ac kit
hanks duece - 1 freebie rim
also thrown in trailer-extra air conditoner set,duece secondary filters@5$,in tank pumps-50$,power steering pump for 5 tonA1?
Attachments
Last edited:
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Marty I would like 2 of your alternators and 2 of those step toolboxes.
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
marty i might be interested in one of those fan assembly for my ac project. ill go make sure mine didnt come with one. also interested in a step tool box too. might be interested in the mkt oven and jeff i am interested in a single 5ton front winch snatch block
Last edited:
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
im selling 40mm and 81 mm ammo cans. civilian cases of MRE.s a 105 trailer complete with top, bows, fiberglass rails. a 105 rolling from no bed, tool box off a 818(the one over fuel tank), some chains, 818 gear box and power steering pump. a m353 generator trailer. ill add more soon
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Okay I might have to send it with someone else, I found out today I might not be able to go
goldneagle
Well-known member
- 4,509
- 1,006
- 113
- Location
- Slidell, LA
Here are some pictures of the tool boxes I just acquired. PM me if interested. $90 each. Most were manufactured in 2011.
Attachments
Dock Rocker
Active member
- 980
- 72
- 28
- Location
- Jackson ms
Goldneagle what are the dimensions of those boxes? Ae the made like under mount toolboxes for a trailer?
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
will bring um with me, if anybody has a hanger bearing I want to trade, one alternator.
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
goldneagle
Well-known member
- 4,509
- 1,006
- 113
- Location
- Slidell, LA
They are underbed tool boxes. Heavy duty! 36" long x 12" deep x 14" high. Locks do not have keys. They can easily be replaced....