REDWOLF
New member
- 428
- 0
- 0
- Location
- Risingsun Maryland
Can I just shoot the plug with the ir where it enters the head or do I need to pull them to check this.crack a fuel injector line at the injector to see if you are getting fuel that far.
check you plugs with OHM meter, just because they were replaced does not mean they are bad again especially if you still have the resistor in place.
It only takes fuel and heat and enough revolutions to start a 6.2
If you have an IR thermometer, check your plugs to see if they heat at all.
have you installed the new lift pump or doing it this sunday?
Sent from my SM-G900V using Tapatalk