74M35A2
Well-known member
- 4,145
- 315
- 83
- Location
- Livonia, MI
Now THAT was funny. Welcome to the club.
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
From the -10 Manual actual Page #3-33I have that valve on my M936A1, however it does not lock the brakes? My truck also as the upgrade momentary push to release brake valve beneath the steering wheel under dash that I never understood what it was for as the brakes never locked. The auto idle up works fine while using the crane...so ya think a portion of my valve us inop?
Brake Lock Override Kit M936/M936A1 Wrecker
Brake Lock Override kit for military 5-ton wrecker M936/M936A1. Includes Valve assy. hoses, fittings, bracket, nuts, bolts washers, etc, installation and drawing instructions. This kit will engage the air brake system into a locked position while using the wrecker boom or for parking purposes.
You will love it..I've got to quit looking at this wrecker stuff before I end up with one.![]()
The Swiss Army knife of military trucks.They are the best and most versatile truck of the M939 series for sure !!
Well currently revs to limiter to compensate for the air leaking out of intake stack and power divider bleederWhat rpm does it bump it up to ?
I have an A2 with that valve & mine does not idle up.
I should have worded it differently.Well currently revs to limiter to compensate for the air leaking out of intake stack and power divider bleeder
With your stop light air leaking, Sound like you have a service side brake diagram that is bad.I have a 90 m936 a1. When I engage the Pto for the crane air is coming out of the end of the Pto control valve and also Out of the intake stack. Also when you hold breaks at a stop light I'm losing air out of the intake stacks. Could these be related? New to the military vehicles and any help would be great
The brakes locking when the pto is engaged is normal.I'm replacing all of those today, but the Pto still throws me off. I know on my truck engaging the Pto locks the breaks up so that could be related, but the power divider valve is leaking out of the vent cap on it.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!