• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Just bought my first Deuce!!

nchittendon

Active member
544
28
28
Location
La Crosse, Wisconsin
How's the pine holding up?
I just have the one board done currently. Had to get the truck over for the snorkel, hauling some brush this week, and working on fluid changes so the racks got put on back burner again.


The universal Napa muffler that is on there is great. Quieted it down quite a bit, but it is a whistler and it is still quite prominent. A buddy with a D turbo always comments how he needs that sound in his life when he hears mine. So I'm assuming it's still loud enough.
 

Another Ahab

Well-known member
18,007
4,579
113
Location
Alexandria, VA
The universal Napa muffler that is on there is great. Quieted it down quite a bit, but it is a whistler and it is still quite prominent. A buddy with a D turbo always comments how he needs that sound in his life when he hears mine. So I'm assuming it's still loud enough.
It is a good sound.

It says "authority", and no BS.
 

m109a2

Member
624
1
18
Location
lake charles la.
If you want your deuce to swim Rustystud had a great thread on how to do your t case and differences and peashooter had the walker # for 90,45 and nipple,For your intake.Al
 

nchittendon

Active member
544
28
28
Location
La Crosse, Wisconsin
Interesting day/night yesterday.

I decide to take the truck to work last night (3rd shifter here). Did my pre-trip, all systems go.
Fire up the truck, let her warm up. All is good.
I get about half way to work (apprx 5 miles of stoplight to stoplight) and notice the temp gauge is pegged at 240. Truck sounded ok, drove ok, felt ok......had the windshield cracked open too so engine noises/heat were even more apparent. Nothing out of the ordinary besides the gauge. My work has an on site truck shop. So I b-lined for there. Once there I grabbed a temp gun, and popped the hood. With the temp gun straight at the water pump, at idle, it was only 150. WHEW!!!

This morning, fired up the truck to come home, all gauges were back to normal.

Gotta love these finicky dash clusters. Now to find the loose connection or bad ground.
 

jerry v

New member
200
1
0
Location
michigan
View attachment 482935View attachment 482936View attachment 482937View attachment 482938View attachment 482939

I'm in total overload right now, but this is what I remember......

~ clutch is less than a year old. Paperwork included.
~ truck is titled.
~ front tires are new, and a couple of rear ones are to.
~ truck was OD green, cab and bed were removed once and everything repainted tan (including frame).
~ tool rack (empty).
~ troop seats.
~ cold front.
~ modern wiper blades on stock arms.
~ spin on oil filters.
~ front manual locking hubs
~ after market muffler (HUGE improvement). Still sounds like the whistler, but you can carry a conversation in the cab.
~ soft top (in great shape).
~ new batteries.
~ jerry can (but it's red cause someone put gasoline in it)

Took it to a friend that used to wrench on them at the local army base, and he climbed around on it. Said the dog bolts were sound, everything looks to have been greased and maintained well. The only thing he found was front axle boots looked to be leaking. He said as long as I'm not submerging them, and keeping up on greasing it, it'll be fine for what little driving i'll be doing in the next year or so.

Drove it and the clutch feels good. Parking brake is good. Steering is good. Rolls down the road good for having the NDT's.

Did a quick walk-around and noticed the driver side blinker was out. Anyone have a bulb number off the top of their head? I know I can search it which I will be doing shortly.

Passenger door doesn't like to latch unless you abuse the naughty girl.

Troop seats need to be re-done. New planks and paint will be one of the first things to be done this summer.

Dura-liner in the box.....good Idea or bad idea?

I'm 300lbs. I think it may be time for a treadmill. I fit, but it's a snug one. lol

I hope to paint it again back to OD. However, I want to re-letter and do stars on the doors instead of the wings. Is there anything I should know about doing that?

You'll see in the pics that one of the rear wheels is green and not tan. Apparently, the wheel was put on backwards?? Perhaps painted wrong? The inside is tan, the outside is green. lol No biggie.

With my big ass on the fender, it was making some not-so-good crackly noises. Wasn't sure it would hold me. Any tips to strengthen these?

And heeeeeeeeeeeeeeeerrrrrrrrrrrrrrrreeeeeeeeeeeeeeeee we go!
boooom auuuuyyyyyaaa:driver::beer::patracy::hammer::hammer::smile::gimp2:
 

nchittendon

Active member
544
28
28
Location
La Crosse, Wisconsin
The aftermath of her first long trip with me.

The spots on the concrete after arriving home. She's always left a little spot on the ground in this area. This spot is no different really.
14022374_10157469674880657_1957434302917881217_n.jpg
Definitely coming from the HH. I have not researched these yet, so I don't know much about how they operate, or why they exist. I have read many posts/threads about them and various things, but never researched. Once we got to the show, I tried to tighten all lines and they all seemed fine. Nursed her home so we can really dig into the issue.
13934564_10157469674920657_7008452608914456921_n.jpg
As mentioned, she's always left a spot on the driveway. But this seems excessive to me. I first noticed it because it was squeeking through a gap between my fender and was spattering across my door.
Again, I don't know much about these HH's, but I would assume the leak I have is a pressure leak of sorts. Only when I'm pulling up a hill, or getting the RPM's up there does is seem to leak. On the way to the show I ran between 2200 and 2500 RPM's. Never a penny more. On the way home I ran her at about 2000 consistently the whole way. Obviously the fender was soaked from the trip there, but I didn't notice any MORE from the trip home.
14064013_10157469674810657_3069793939649414083_n.jpg

As mentioned........just another adventure.
 

nchittendon

Active member
544
28
28
Location
La Crosse, Wisconsin
Boy, she didn't like the trip to iola. Go out to drive it to work last night and the outter door lever won't work. It rotates, just doesn't do anything. Had to climb in from the passenger side and open it (glad I didn't combat lock the passenger door!)

The inside door handle does everything it should, but it won't combat lock. The outter handle doesn't do anything. Are the guts in these doors hard to get out? I'll be tearing into it tomorrow.
 

nchittendon

Active member
544
28
28
Location
La Crosse, Wisconsin
Regardless of her minor issues, she still has work to do!

Used the truck for "rides" at my place of employment last weekend. 3rd year in a row. And yet again, she never faltered. Love this truck.

I had my boys along this year as tour guides. They basically gave everyone the information such as warehouse square footage, production numbers, etc, etc.
14089093_10157523691765657_1592030519868159785_n.jpg14089280_10157525254535657_7829570269495862993_n.jpg14141810_10157524295455657_6055947638124433470_n.jpg
 

nchittendon

Active member
544
28
28
Location
La Crosse, Wisconsin
Got my new decals last weekend! Didn't get a chance to post up because on friday we had our 3rd child!! 3 boys now. And they all love our deuce.


14671336_10157803484640657_6018437920654067975_n.jpg


Literally 3 hours after he was born.
14713511_10157804708970657_9161528030867277976_n.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks