• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Several Cranks To Start Cause?

NY Tom

Well-known member
Steel Soldiers Supporter
510
761
93
Location
Riverhead, NY
Well for me just push it down very little. Even at that temperature when cold.

I figured I would throw it out there in case you don't have a real bad problem.

These trucks have personality. ;)
 

SandBar

Full Time Patriot
755
231
43
Location
GA/FL
Yup. Use Permatex to reseal. Make a new gasket from sheet gasket material from your auto parts. If you ruin the existing gasket.
Thanks, will dig into this tomorrow. Can I use the same dot 3/8 air line for whatever is inside this assembly?
 

SandBar

Full Time Patriot
755
231
43
Location
GA/FL
I'm not trying to save any money at all :D just read a how to bypass the FDC and it said to use DOT 3/8" air line. If that's not a good choice I am all ears, as I was going to mcmaster carrs fuel line section before I read that.
 

Bill Nutting

Well-known member
Steel Soldiers Supporter
569
1,267
93
Location
Chesterfield, Mi.
I don't know much about the correct makeup of DOT air line. For all I know it's just fine to use. Whenever I am using rubber hose for fuel, I go to my local NAPA and buy fuel rated hose. Maybe it's not all that important, I just don't want to be wrong about it and the hose fail...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks