Scoobyshep
Well-known member
- 991
- 1,165
- 93
- Location
- Florida
That's the strainer if you order a set of wix filters you can rob one of the gaskets out of the filter kit and use that
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MEP-003A
- Thread starter rlegare44
- Start date
Scoobyshep
Well-known member
- 991
- 1,165
- 93
- Location
- Florida
I know for a fact the one from the filter kit will fit I have done it on that exact model
Are the filters the same in all three canisters? If I'm replacing one, I guess I should replace all, that is if they exist. When I order the filters, do you have a preference
Where did you purchase the filter kit? This is crazy, this is the only thing that's holding me up.
All I can find so far are the spin on filters and they require a new mountaing. Did you have that problem? if not I need to know the site for the drop in filters.
Scoobyshep
Well-known member
- 991
- 1,165
- 93
- Location
- Florida
sorry had to get back to the office, Amazon, Wix 33511. buy 3 of them. use 1 gasket in the strainer, use the other 2 to replace the filters and gaskets. the unused filter can be used later with the replaced but slightly used gasket
Scoobyshep
Well-known member
- 991
- 1,165
- 93
- Location
- Florida
wix 51004 if you need an oil filter
- 16,449
- 23,403
- 113
- Location
- Burgkunstadt, Germany
The same gasket fits all three canisters. Look up the gasket in the TM and plug the part number into your search engine.
There is also supposed to be a copper washer under the domed nut.
Perhaps if you look at the parts TM, it will be clearer to you.
There is also supposed to be a copper washer under the domed nut.
Perhaps if you look at the parts TM, it will be clearer to you.