Recent content by frank1669

IN

For repainting ( dyeing) A vinyl seat What products do you guys use? I have found SEM brand, LVP, and Dupli-Color. is one better than the others? do they hold up over time? i have a perfect replacement seat for a CUCV its Just the wrong color. Thanks

east bound freight. Setting out feelers for loads going east bound I will have 4'x8' available on the flat bed or 6x16' on light duty car trailer I will be going from Idaho to Virginia I can take I80, I90 or I94 so if you need something dropped in that direction let me know I am not a broker...

AIE1 If I can get the top of a Mutt to look half as good as the bottom of yours I will be happy. And thank you to everyone for the Help . I will let you know how it turns out.

I am going to be looking at a running driving Mutt on Monday ( thats the only description I got so far.) . I know nothing about them. so my questions. how do you spot a re weld? were are they prone to rust? What are the most crucial spots to look at. I am capable of fixing anything...

Iam delivering axles to seattle area, then goihg down to help out a friend. my flatbed will empty most of both ways.

I am leaving Idaho 8-18 going to Seattle then down I-5 to central California. Unexpected trip so sorry for short notice will be returning in a couple of weeks Could go through Nevada on way back if Needed. Sorry no complete vehicle this trip But axles trannys etc OK. If Interested Please...

thanks for the tip. They seem to have a lot of info.

I never heard of this jeep until I read the original post I would venture a guess that they are m211 axles The stock Willy's axles would not hold up to a 44" tall tire and the stock brakes would have a hard time stopping it. Also unless they widened the axles significantly it would not be able...

Does anyone know or have the instructions for the deep water fording retro fit kit? I have the 2 valves on my engine but what else is required to make this functional ? I know I need the exhaust and air intake risers.

is this the one your looking for?

I talked with Beechwood canvas They said it would work Hope this help someone out in the future. :beer:

Has any one Here installed a 72 CJ-5 Indshield frame and used the factory canvas top ? My main concern is the channel for the canvas has less of a bow ( arc ) to it than the M38a1's . Reason for doing this My 2 M38a1 frames are trash. I have a perfect CJ-5 frame with new glass and wiper...

With perfect springs and you don't mind them rubbing when you turn up into a drive way then yea they fit. Some people will run them this way- I won't ( it tears up you tires and a good Rub will dent your fender. So Usually no but it depends on the brand. Tires size is more subjective...

Yes I did. The problem came from miss reading # 13 I some how came away with it not having a voltage drop when he stated a significant voltage drop. (sorry)