• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by Mk23

  1. M

    HMMWV Snow Plow

    Is that the specific one for the Hmmwv? What are you asking for it?
  2. M

    H140 fuel pump?

    So what pump should I be looking for on Ebay? I have one in a similar situation.
  3. M

    ECO Hubs Who needs 3:07 gears?

    No problem at all this far. Some of the steep hills I have done, were completely unnoticeable.
  4. M

    ECO Hubs Who needs 3:07 gears?

    I would like to know that too...
  5. M

    ECO Hubs Who needs 3:07 gears?

    I made sure all my threads and surface were immaculate. I used torque wrench, though I am anal about that. That's a rear wheel right? I didn't see the snap ring being trimmed or put back on the shaft.
  6. M

    Essex 427 loadbank

    Thank you!
  7. M

    Essex 427 loadbank

    Great, thank you. Anyway to find out the Amp rating on this contactor? A807-1501, I have searched high and low and couldn't find specs
  8. M

    Essex 427 loadbank

    So you are saying taking at apart and see if I can source a magnetic switch then? Where did you get yours?
  9. M

    Essex 427 loadbank

    I am never 100% of anything in life... That being said, there is 24v at the magnet with the loadbank turned on. It's not retracting. I also used a separate 24vdc source, with everything else off, straight on the magnet, its not doing anything at all... I took that as an indication it's the...
  10. M

    Essex 427 loadbank

    My loadbank I've had for several years quit working last weekend. Today, I had the time to open her open. All the basics check out. Checked the contactor. Moves freely and there is 24v at the coil, but it's not kicking in. Little electromag give up the ghost? Very carefully with isolated...
  11. M

    ECO Hubs Who needs 3:07 gears?

    Would anyone have info on how to reset the Dip switches on the back of the Speedo in a A0 truck to get correct reading again? Right now, it shows exactly half the actual GPS verified speed, which of course makes sense. Not that I can't quickly double the speed read in my head, but still, it...
  12. M

    ECO Hubs Who needs 3:07 gears?

    I have about 150-170 miles now. Not very much, but I am very happy with the mod. Now that the transmission has taken a little time to learn, you come up to a 55mph hill, keep holding the accelerator down, and truck will down-shift. Sometimes even two quick sequential down-shifts, and you keep...
  13. M

    ECO DIRECT DRIVE HUBS

  14. M

    ECO DIRECT DRIVE HUBS

    I have done two sets balanced with Antifreeze, first the original G/Y and now my ORDs. ONLY drawback is you will loose it, if you air up/down a lot. I don't, so tires stay good for several years at least.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks