Recent content by scrambled

I have single chamber flowmasters and the exhaust turns out in front of the rear tires. Sounds good and looks good.

You do not need to replace the resistor. It lowers the voltage to the glowplugs to 12v. Just make sure that your glowplugs are fed from 12v when you switch back. Right next to the glowplug solenois is a good spot to jump the 12v off. My truck is still 24v, but I removed the resisitor and fed...

I bought tail lenses from LMC and they are beautiful. They make the truck look bad...

Pull the steering wheel with a puller. Pop off the collar and blinker assembly. change out switch. You can buy an ignigtion switch for 10 bucks from the parts store. The steering wheel puller was 8 bucks and the screwdriver thingy for compressing the spring above the blinker was around 12...

Does the SF97 have govliquidation as the purchaser or is it Skark? If it is Skark, he can reassign the sf97 to the new purchaser. If not, it might be worth a call to govliq to see if they would issue a reassignment.

The fronts are 3.5". I have a set of 4x10 in factory brackets behind the seat. I found the brackets from a civvy truck at the junk yard. I blew up one of the 4x10s and replaced them with some 6x9 speakers i had laying around. sound good and you cannot see them when the seat is slid back.

The rope and hook are 1/2" braided synthetic line. I bought it from a guy in florida that owns a hummer pimp-out shop. I cannot remember the shop name, but very few people had 1/2" synthetic. The steel cable I pulled off was over 75 pounds. It was rediculous! The base is just the warn...

The problem is the parking lights. Both years used one wire to power the high beams and one wire to power the low beams. These wires are the same colors from both years and you can connect them right together. The 91 uses an extra parking light, so it has 2 dark blue and 2 light blue wires...

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Anyone have a clue what these used to be? Look kinda cool. Thanks, Travis edit, infraction removed, out of the kindness of my heart.

I just installed a front end from a 91 burb today. Picked it up from Pull a Part on Saturday. I unplugged the wiring from the firewall on the donor, but the plug was different from my 1008. had to splice the wires, but all the color matched except for the horn. The 91 front clip has dual...

I have a Powerbright 900 watt 24 volt to 110 inverter for my 1008. I just clip it to the batts when I need to run my 1/2" hammerdrill at work. I use it in tandem with my robodrill for projects. I am going to upgrade to the 3500 watt/7000 surge unit soon. I will probably mount it in my...

I finally did the doghead realy mod. Since I had all of my wiring junk out I added a 7 circuit Painless Wiring panel under the dash to run the stereo, 200 watt inverter, and 12volt power port that I built into another STE/ICE plug.

Warn 24volt m15000. $900 from ebay brand new in box. Plugs into the front slave recepticle. Big hook!

I am using the PVC inserts from Trailworth Fab. No runflats for me

I am running the 37 goodyear MTs from the hummers on 8 bolt hummer wheels. I have nol problems running them at 40 psi. They ride great and seem to not be wearing a bit.