Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Welcome to the site. Not sure what part of the state your in but we are located just outside of the capitol. This site is a wealth of info and a lot of great people. I have a M35A2 and love it. It is a man's truck for sure with no power steering and standard tranny. Good luck and hope to...
Mine just started doing the same thing. Changed the fuel filter and primed still not getting fuel. Ordered a set of rebuilt injectors and will replace when it's running again. I figured mine had leaking injector(s) causing the knock and rattle. She always ran great until now.
I used a drift pin through the rear alt. fan guard and it was enough to allow to tighten the nut. I think I purchased a locking nut that worked at Menards. My pulley didn't feel loose but when I removed the belts I could get a little play in the shaft. Just a thought.
Not sure but on mine I installed the 200 amp alternator and it had a weird noise that I thought was a bearing going out and started getting louder. After tearing into it I found that the nut holding the belt pulley on the shaft was loose. I tightened it and have not heard the noise or any...
I too was going to rent the U-Haul trailer but for a long and rough road (Penna Turnpike) I went with a 20' equipment trailer. Cost a little more but for me it was worth it. The hills and turns the thing rode like a champ. The 82" wide wheel base will just barely go between wheel wells and it...
I rented a flat trailer to haul mine. Brought it back pulling it with a 3/4 ton dodge from New Jersey and had no problems. They are wide and pretty heavy. Good Luck!!
Hate to say it but I don't think any of the steering wheel pullers will work at least they didn't for me. I made one from the threaded puller bolt, a piece of flat steel and 2 - 1/4" x 4" NF bolts. There are 2 threaded holes on the wheel. Soaked the steering shaft with PB and it came right...
I just got a Notice of Disposal for a lot in GA. I checked My Account and I never bid on it. Called GL this morning and they friendly help said that he thought someone superimposed some numbers and that he would get it fixed. We will see.
Tinstar I'm pretty sure that both lots are gravel. We had about 8" of rain this weekend so I'm sure everything is soaked. I have to go out of town on tomorrow or I would run by and take pictures. Good Luck!!
The Santa Fe Chapter of the MVPA is sponsoring the 20th "Fall Midwest Willy's Reunion". Sept. 9-11 2016 at the Capital Plaza in Jefferson City, MO. You can contact 1-888-950-5062 for more info or register with Betty Massengale at Mass5030@mediacombb.net. Hope to see some SS members there!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!