Search results

If you are going to be near gimpy or meeting up with someone by gimpy, I need a case of carc hauled up this way. Since you are so much farther north it would only work if I could meet up with you on the way up. I think your route would be way to far away from Cincinnati.

Over the last couple of weeks I have installed some pigtail tiedowns for the bed that I traded gimpy for. He had the original style and I had some of the trailer style replacements. He also sent me a stone guard for the grill. The front step I got off Ebay as the tailgate step was way to high...

I have the transformer but do not know exactly where I laid it. When I find it I will put it together in a box to that I can plug the ipod into then plug it into the AM-1780.

The positive terminal looks way to close to the hold down. Hard to tell but I would say this might have provided a spark. Look for evidence of an arch on the hold down or the cable end. The hold down is rubber covered but if there was contact vibration could have worn down the rubber until a...

319, Can you make a pickup for me? PM sent. Chuck

One of the dash bulbs has a small diameter red spot in the center. That is the high beam indicator. Download the manual from the resource section and it will have a diagram of everything on the dash.

I appreciate the write up but if you attach the files instead of putting down a URL link they will show up without having to link out. Makes looking at your hard work much easier. Just press the manage attachments and add all the files you want to be viewed. Kenny is right. The voltage should...

I wish I was closer. This sounds like a great event.

The bulb is 12 volt. No problem there. IIRC is the alternator is defective (regulator in the alternator) the idiot light will not come on. I am pretty sure you can check the wiring for the bulb by grounding the number 1 terminal on the harness to the alternator while it is disconnected. They key...

I was wrong. Mine is a Monroe unit. SC2913.

I did not realize this was a specific kit for the cucv. Looks great. I may have to get one.

I don't think it will matter in this case but when you get parts tell the parts guy it is a 1984. All GM cucvs were built to 1984 standards no matter what year they actually were.

They are inside the transfer case so basically any checking would be during a full tear down. Put the drive shaft back in and drive it looking for any unusually vibration or noises. Get off pavement and check low, low lock, and high lock also. If everything sounds OK with no vibration you should...

The one I put on is a Gabrial unit. I can get the number tonight. It also was only $30 at O'Reilly Auto Parts with the correct hardware.

The new shock should have new mounting hardware. I just replace the one on my son's M1009 this morning and the new one came with the hardware. There should be a nut for each mounting part that comes off. Mine had a castle nut at the tie rod end and on the axle side. The old damper had nuts to...

Thanks Yeager1. Chuck

For those that got a kit already, how much was shipping running in your case? Thanks Chuck

Showed up on my todays post page and I knew Monkeyboyarmy was at Aberdeen. I really don't think dates are going to save you from being known as a trailer ho. BTW as far as you know I do not have your M51.

I will lump in. I need a case of paint picked up from Gimpy and delivered closer to Michigan. He brought up Monkeyboyarmy but you are no closer than he is. I need it closer than driving to Gimpys house in Cinci. I am near Ann Arbor. Just like Lane (citizensoldier) to buy something big and...

I will pile on. It is a five ton M818. You can tell by the battery boxes, long fenders, spare tire mounting, Wheels etc. :deadhorse: The carrier is M818 specific. The cargo truck M800 series have the tire mounted in the bed at the front. The M900 series cargo Five ton has space in front of the...