Search results

Bonjour, si tu veut avoir des instruction d'entretien vient voir notre site www.militarytrucks.ca Nous avons de livres gratuit sur le site. Si tu n'a pas ce que tiu a de besoin laisse un message au directeur du site. Bienvenue sur le site.. Regarde sur le site, nous avons faite un conversion...

Tomorrow morning I am going to recouver my new M1008, I rented a 16ft trailer, dual axle and will be towing all of this with a 2004 GMC 3/4 ton. I have hauled other trucks this way with no problems. Just make sure that if you have an electric brake controller that you adjust it empty and then...

Thanks for the info on LMC I will give them a call. Unfortunately there are no pick and pull's around here. If the vehicle is over 15 years it goes to the crusher.

Not a problem.

Just reading this post 6 months later, i saw your M43 at the Muster Aand I am looking forward to seeing it in Aug 2011. Strectcher can be bought at Safety Supply houses and are usually cheaper than surplus items. If you need anything post it on our site for free www.militarytrucks.ca

Boy you have to come back East and I don't mean into Alberta. In Ontario there ar a lot of Deuce owners and even 5 tons. We own 3 MLVWs, 1 x M35A2, 1 x109A3 and a M816 wrecker. Check our website MilitaryTrucks.ca Website , it is a free site run by my son. I like you deuce avatar.

Are you the same Law as the gent in Ottawa and if you are have you paid back your Dad for the Iltis(he-he)

Pictures of the new 903C generator and the old we sent to scrap

I recently took one out of my M1031 and when I brought it to the scrap yard the generator welder weighted in about 900 lbs. Believe me it weights more than 200 lbs. The first picture is the new generator the 903C and then the old. I used the generator to run my MIG welder

Wanted Transmission indicator CUCV I am looking for 2 transmission indicators for the CUCV M1010 and M1031. The item I am looking for is the indicator in the dash, the one with the little red arm. I have 2 CUCVs and both indicators are broken. So I hope someone has them or you can send me to...

Very interesting post, my wife was a medic and she has her own M1010, but the strechersis a great idea especially for reenactments. I think once the reenactments are finished it would be appropriate to have the Mule pick up the wound. Great crowd pleaser. Next projrct build the clamps for...

Thanks Ron I will look it up, I believe I have a light that fits.

In the cab dash of the M816 wrecker on the left bottom near the door there is a data plate and a screw on cord plug that appears to be for the winch control. I can't seem to find any info on this plug. Does it control the front winch? and what does the controller look like?

Mules of the North What is more important driving the Mule and enjoying it or having a nice paint job and parked. After seeing Ms DH's mule, my wife gave me my marching orders. " A mule or no new trucks, well we now have a A5 with quad steering, we bought it from David Kelone and picked it up...

I also have a Boss and by far they are the best.

:deadhorse:2cents The question you have to ask is will the mount fit? If the 1/2 ton has CV joints instead of a full axle the frame will not fit without serious modifications. Don't forget the the M1008 series had a full differential on the front end and this means different setups on the end...

Last week I purchased a M1008 and i have Boss 7.6ft Super duty plow. I called a local dealer and he found me the right mount for the truck. He ordered it and it should arrive in 2 weeks(Xmas etc). We will transfer the plow from our 2004 GMC to the 1985 Chev M1008. We will transfer the...

Up here in the far north it was a beautiful day, about 29 degrees and we decided to start all the MVs. All the CUCVs started no problem, and then the M109 and the M35. We didn't even need the booster cables. The trucks were warming up and all was going well till we noticed an oil leak on the...

Today we completed our conversion of the M1031 Contact Maintenance truck. We removed the old welder/generator and we replaced it with a 10kw 903C generator. M109 Guy built a control panel from scratch and then mounted the generator into the CMT. The truck is now equipped to run our MIG...

Hi I have just put up a 48 x 20 Maintenace tent and if you need any parts for your tent go to Mountain Gear Surplus in Asheville NC they have everything you are missing. The tent I got was a brand new vinyl style with the exception of the front panel which was used and had a big tear. I...