Search results

Hoefler, what mounting brackets did you use for this box? I have the box and when I tried to put it on I was about 2 inches to high and hitting the cab. thanks rc

Thank You....Hope it fits!!!

does any one have the stock dimensions for the alternator pulley on the 8.3l cummins motor? the pulley I need for the unicor alternator is an: 8 groove pulley the inside diameter measure .870 with I guess is .875 or 7/8 inch shaft I do not know what the out side diameter of the pulley should...

I purchased a unicor 200A 24V alternator and the brackets to make it work on my M934A2. My truck arrived missing the original alternator. Does any one know a part number that I can use for the pulley. Its serpentine drive and the alternator shaft measures .870" and has a keyway. Im looking...

Thanks for the information. I guess I know what the large hose reel is for now. Thanks again. So, in theory if I did mount a generator to the vehicle, do you think a 3k unit would power the box. Mine is missing the heating/cooling unit, which im on the fence about having, and im sure I would...

did the 934 have a generator mounted to it? if yes which one? or is there a better option? thanks rc

where can i get one? thanks rc

was looking for part numbers of O-rings and diaphragms and those type of things.

where can I find part numbers and where to get parts for the ctis system. I just got my 934 and its in pretty rough shape. im sure I will be working the ctis really soon thanks rc

ill take a set of brackets if there is an order going out. rc

what are the pitfalls for installing a big cam 400 in the m923 5ton? thanks rc

I found a new heavy duty Curt receiver hitch that should fit the deuce perfectly. I like the fact that it has some drop height so that I won't need a drop hitch adapter as tall as without it. It is Curt part # 15605 and has a gross towing weight rating of 18,000lb, and a tongue weight rating...

I have a 5 ton 923. I was searching the threads for a receiver to install. I found and ordered the curt receiver 15605 I think was the number in the thread. when it arrived it was way to wide. I think like 40"+ my 923 needs a width of 33" max. anyone know the part number or reference for a...

hey guys, does anyone know where i can find the clips on the straps and replacement clip attach pints on the outside of the cargo cover. i have a few that are broken and im not having any luck finding replacements. thanks ryan

we bought a scrap big cam motor and are going to "steal" some of the parts and do a little transplanting. ill let you guys know how it turns out rc

since i have got my 923, i have done the following: full fluid service installed bullet proof windshield removed rh tool box and installed fuel tank connected rh fuel tank to stock tank with shut off valves herculined the bed purchased troop seats installed 5000w inverter installed warn 18k...

Most people wouldn't even know, or see for that matter what it is. They are too busy texting. The best thing for getting through rush hour traffic is a 5 ton with a big snow plow.:shock::shock::shock: im working on that idea now for my 923 right now!!!

hey guys, just putting out a question. My buddy was pulling about 19k with his 923 up a hill and he said it was really lacking in power. it dropped down to first gear and by the time he got to his destination all the temp gauges were way above normal and it "smelled" hot. so the question...

thanks guys, glad to be here, and access to all of your acquired knowledge rc

hi guys, i just found the site and im glad i did. i just registered and here are some pics of my 923. i have working on mods since i got it and will post those when i find the pics.