Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
make it into a triangle shape (or V) instead of a Y shape. That will keep your top pipe from bending. also put a couple of cross pieces in the middle. also on is V shape.
using a slave connector FYI: I had a deuce that had both of the wires from the slave connector hooked to ground. It is a good idea to check where they are connected before using the slave connector.
Mine will high idle. I usually let it warm up all the way or turn it off then start it again to reset the high idle.
I would adjust the screw on the solenoid
I have this issue also on my 543. When I start the truck I need to depress the fuel pedal all the way for it to start. It has been like this ever since I bought the truck. AFter I changed the HH o-rings it seemed to be worse and take linger to start. I think I will try to replace the...
I just had this problem after I changed the o rings on my Hydro head. The lower oring was the wrong size. I am hoping that it is fixed now, but wont know until I drive it some more.
I have done the tug-o-war the last two years at Michigan Truckfest -- TRUCKWARZ HOME PAGE. It is A lot of fun. I always said I would never tug my truck, now I cant wait for every event. I even lost to a old school monster truck called "uncle slam"
!
Does anyone have measurements for the 818 early style 5th wheel chocks? I have been unable to find any for sale and am considering making some.
thanks in advance