• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M

    last word in CUCV stereo install

    If you drilled holes in the roof I would never do that myself.
  2. M

    car alarm install ignition disable wire

    Hello, Forgot to mention that it doesn't appear to have a horn in it. Where is the horn supposed to be (I'm 99.999 percent sure it is missing) and what are the wires to it? Does the M1009 come with one and is it 12 or 24V. I'm assuming 12v, the viper alarms sometimes connect to the horn and I...
  3. M

    car alarm install ignition disable wire

    Hello, As I am dropping thousands on my M1009 I am also preparing to install an array of HAM radio equipment in it that can be quick disconnected along with the tool box. This morning I go outside to find a beer can on the street next to the drivers door. Last time that happened with my Bronco...
  4. M

    M1009 receiver installation

    The camper trailer is a light one with dual axles and good brakes. I will only tow it for short distances if I have to. My brother can also pull it with his P/U that has duallies. Plan on using it at some construction sites and want the receiver hitch just in case I need it. If you can get...
  5. M

    M1009 receiver installation

    Hello, I am overseas and my brother recently drove an M1009 I purchased to his house. I would like to be able to tow a 1972 22ft Prowler camper trailer with it. The camper trailer has a 2 inch ball. I asked my brother to look under the bumper and on the frame to see if I can buy a standard...
  6. M

    M1009 gun rack

    Hello, My brother just picked up my M1009 last week that was purchased from a company that uses vehicles in SoCal for movie companies. This one was used in the recent movie "the men who stare at goats" for several scenes. He said on the trailer for the movie there is a scene where George...
  7. M

    USMC Kawasaki KL650A SOLD on GL!

    Hello, The NSN listed on the auction was for the gas version from Hayes. Hayes is the company that not only mfg the diesel engine but does the militarization of the gas versions. Question, where is the MT500 in the classifieds here on this web page? I didn't even know there was a Harley MT500...
  8. M

    M1009 Air Conditioning Kit

    Hello, I have been researching to find out how to put AC in the M1009 that I just purchased. I found a company, Nostalic Air Parts, that sells a kit specifically designed for the M1009. It costs 945 dollars. I just bought my M1009 and my brother will pick it up this Tuesday and keep it at his...
  9. M

    child carseats in M1009

    Looking closer, the link I just posted is actually three seperate seats. I have contacted them asking them if they sell the middle section. I would prefer vinyl also to match the existing seats. We'll see. Mike
  10. M

    child carseats in M1009

    OK, I found the web site that makes the 3rd row seating it is called www.littleseats.com This is definitely not what I want. I was on ebay however and found a manufacturer of leather bench seats for many different types of vehicles. The middle section folds down to become an armrest. These...
  11. M

    child carseats in M1009

    when you use your M101A3 trailer with the M1009 do you connect to the stock pintle on the bumper? Is the trailer level or is it tilted by a significant amount? Thanks again, Mike
  12. M

    child carseats in M1009

    OK, 48 inches wide so the sunshine radian 65 is not going to work in a triple wide config. I'll keep researching. There are makers of aftermarket seats designed to bolt in but it has been a while since being on the web page. They make them for the 4 door jeep rubicon that allows a 3rd row but...
  13. M

    child carseats in M1009

    According to answers.yahoo.com the sunshine radian 65 is the narrowist HWH 5 point harness seat that also has steel re-enforcement in it. Below 33 pounds it is used as a backwards seat and from 33-65 it is forward sitting, both configurations secured with lap belts. The width is 17.5 inches...
  14. M

    child carseats in M1009

    What is the width in inches of the back seat on the M1009? I was on a web page that discusses different car seats having different widths. The infant seats may be narrower with some brands. I read a post on SS that discussed the folding seat not latching properly, I would definitely want to...
  15. M

    child carseats in M1009

    OK, ---first on a the trailer, I had been told to use an M105A2 with the M1009. After researching, I'm embarrased as that is the trailer for the deuce. I did find some web pages where people heavily modified the M101 series trailer to work with a jeep (lots of work). I'm still scratching my...
  16. M

    child carseats in M1009

    Thanks all for the great information. --- It sounds like I can get three baby seats on that back seat and that is great news. Does anyone have the width in inches of the back seat so I can start shopping for them? --- No there is not a radio rack in this M1009. I am a HAM radio operator so...
  17. M

    child carseats in M1009

    Hello, I am new to the web site. My wife just delivered triplets so I have car seat questions. I'm still active duty in Bahrain but soon to retire and bought an M1009 off of ebay that looks very clean for 3.5K with 31K miles My brother is going to pick it up for me. I don't remember if there...
Top