Search results

This time I went to the Garbee website first. I see from the photos that the block just behind the drivers side front fender is labelled 12 volt. Is this the intended purpose for this block. Mine has a flat plate which is mostly rusted away and the material behind it is also rusted. Before...

Well after spending the afternoon at AZ MVD I finally got my title and tags. Now the work can begin, just have to wait for some of the parts I have ordered to come in.

check out this page. has all the dimensions and weights. http://classicunimogs.com/specs_unimog_411.html

I had to have the rims on my Pinz made. We took the centers out and had them welded to 16" DOT outer cores at the same offset. I really like being able to run any tire that will fit on a standard 8 X16 rim and still have the stock look. I work with a Kubota shop here for some of the tractor...

What are the prefered rims for the M37? I have the split rims now and have not had a lot of luck at the tire shops in my area wanting to work on them. I can go out to the interstate and find a truck stop that I am sure will help. Are there any modern rims that are close in appearance to the...

RE: Re: RE: Re: RE: M37-B1 Wiring Thanks, I will place that order this morning. I am also going to order up the wiring harness from Vintage Wiring of Maine this morning.

RE: Re: RE: M37-B1 Wiring I was ordering the parts for the lights and noticed a rubber boot. In the installation photos on the garbee site it shows a rubber boot for the light. Am I to assume I need to get a boot for each light also? I recieved the CD manual today and got the truck through...

RE: M37-B1 Wiring So if I understand this correctly I will need one each, per headlight, 79562 lens and one each 78143. I will also need the appropriate connector for the bulbs. The Garbee site is an excellent site, kudo's for a job well done. Don't you just hate the new guys with all the...

RE: M37-B1 Wiring Thanks I am waiting to hear back from Vintage Wiring of Maine so I can get it ordered. I was looking at the wiring and it is suspect in more than a few areas. I don't want any problems to creep up later. When I did my '70 power wagon I overlooked the electric system and...

I was just going to take the lazy way out. I have the benders and cutters just need to get a new flare tool (old one not up to the task).

Well Phoenix of course. Sorry, I forget sometimes that not everyone know where the ANG is. It is visible from Phoenix Sky Harbor Airport and the Air National Guard facility. I have spent too much time in the valley. The Papago MV show is a great event and a good time. There area a few...

I know it is a bit early but some advance notice is good. The weather is nice here in the desert this time of year so if you find yourself in the area stop by. January 27 through January 28, 2007 Over 100 military vehicles will be on display. Features include a swap meet, 50/50 raffles, and...

I want to install new brake lines through out the truck. The existingfront lines have been crimped off to stop the leaking cylinders at the front wheels (seems to me it would have been easier to just rebuild them). The rest of the lines have some rust pits and most likely would be fine but I...

sounds like the source for the wiring. I have sent them an email and hopefully can get one on its way. I am wanting to get the truck mechanically sound before addressing the rust issues. Thanks for the info.

Does anyone make a wiring harness replacement for the M37's?

I looked at a few of the trucks and decided on this one as I thought it would be a good start for my son. I don't want to do all the work and wanted to find one clean enough he could do it in a reasonable amount of time. He is so excited to drive it that I may have to take it out once and let...

The previous owner painted it to stop the rust issues. There is the normal rust in all the usual places. All the insturment cluster was painted over as the electrical system does not currently work. The truck just needs lots of TLC, brake lines, a tailgate, pioneer rack,canvas tops, a...

Thanks again for the links. I will be getting at least one service manual. The parts manuals are without a question one of the most important pieces needed for the trucks. I own three different versions for my Pinzgauer. I don't know how you could work on one or even order parts without them.

Thanks for the reply. Here is a picture of the new project. Of course any suggestions would be appreciated. Is there a good parts book/list for these trucks?

I broke down and bought an M37 as a project for my 15yr old son and I to work on. A few rust issues but nothing too serious. The two biggest issues I have are the brake lines (been crimped off or removed) and there is no top for the front or rear. I see the link for the top in an earlier...