Search results

I'll give adelmans a call Thanks

Does anybody know of a salvage yard that has parts for the m915-16-20 ?

Thats a nice truck...good luck with it !!!

I'm interested.

Now that is a happy and informative ending.

You fella's already are geniuses... One guy parts a truck out , then when it snows he cant remember where he left the parts. The other guy didnt figure out that a truck with 2+ft of center clearance would high-center trying to ride over a pile of cars 6 ft high. We're all human, lighten up and...

Get it running, turn the thumb screw on the pump in and it wont shut off till you shut it off.

No my trucks dont leak air from the actuators after I turn them off. I get a burst of air when it turns the fan on ,but I dont hear any air when it disengages the fan. I think it bleeds it off slower.. I just hear the fan shut off.

The only time wasted is your reply.

The difference between the politician and the fuel gauge is there is nothing you can do to fix the politician....

The upper radiator tube about 2 ft from the radiator.

10 -12 tons on my M929 is business as usual....15 tons was too heavy for comfortable driving. Im running 14.00's @90 psi.

Sweet truck.. We need more pics.

It will be worth all your trouble. They are great trucks , they just need more poop. If mine pops its getting a 400 for sure.

http://www.steelsoldiers.com/showthread.php?83799-M939-transfer-case-air-lines-installed-wrong&highlight= heres some pics

http://www.steelsoldiers.com/showthread.php?77105-CAT-7155-Manifold-rebuild/page4&highlight=7155+cat on page 4 has the info ... RR is a smart guy so i took his advice. The trans shifts smoother and i know theres no junk getting in the valve body thru the air lines. The setup is kind of...

Ive already got my eye on a pump with the aux govenor but for now I'm putting a throttle under the platform so its right next to the controls for the lowboy.

I hope so too, if not i'll put an 18 speed in it...comparable bottom ratios and a double overdrive....

I finally found a nice M916. I want to use it to pull a dump trailer and a lowboy. The 5th wheel height was too high, so i got a 2.5 " kingpin 7" overall height sliding setup. I removed the roller and made some ramps. The hydraulics on the truck will run my trailers so I had a wetline valve...