• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. stampy

    Armor kits

    There are armoring threads here on ss.
  2. stampy

    Forming a Rally?

    Camping out and trail rides are a must in any rally in my opinion. I really enjoyed the Uhwarrie rally in NC. MASS as Neil named it (Mid Atlantic Steel Soldiers) yes he asked Chris for the OK. I agree we don't need to "clone " a rally that is successful and have it two or three times a year in...
  3. stampy

    1009 interior upgrades installed today

    Power rear window is awesome! I put one in mine! Still looks stock but works great!
  4. stampy

    Code Enforcement

    Dave I agree that "When you are right you shouldn't back down". I wish you good luck in dealing with code enforcement. Try to find out who turned you in and then they can be persona non grata as far as getting help from you or tools or anything. Unfortunately there's not much you can do to...
  5. stampy

    Battery post melt down

    Well Dang! all these years I thought it was conductive....thanks for the education...well you and google.
  6. stampy

    How much cranking ?

    My bet is on the filters.
  7. stampy

    Battery post melt down

    I believe dielectic grease is the same stuff and it works great on all electrical fittings/ connectors
  8. stampy

    Code Enforcement

    Ok Dave we get it, you are pissed. I was NOT suggesting pacification, but if you know your neighbors you tend to have less trouble with them. I am sure you have an idea which one is the problem (based on your post). This guy/girl obviously doesnt have the cajones to come to you with the...
  9. stampy

    Wolverine Tech. Centrifuge review

    Evaporating the water may not happen as it falls to the bottom of the barrel. You can boil it off but that takes a lot more energy. Better to heat the oil and drain the water and heavy sludge off the bottom (of the barrel before you centrifuge the good oil. I take about 6 hrs to do a 55gal drum...
  10. stampy

    Can a Deuce be used as a Commercial Motor Vehicle (CMV)?

    They hauled cargo for the military...so I would say sure! I would talk to the DMV in your state to see what regulations and insurance requirements are though. I also believe there is a reason that you DON'T see a lot of deuces hauling cargo (the single master cylinder braking system...
  11. stampy

    K&N air filter on 6.2

    I got rid of the foam on mine but I did put in a cold air (ram air) type setup that pulls air from the front of the truck (there is a knockout near the jump pont in the front)
  12. stampy

    Code Enforcement

    I wouldn't turn him in, because yes you would be stooping to his level. I would go talk to him/her. I had a neighbor who Objected to me putting up a fence on MY property , (he had to move his portable shed as it was over my property line about 1.5 feet). I went to talk to him. While the...
  13. stampy

    Bad alternator, or is it?

    Oh and mine charges at about 28v across the batteries but sits dead center between the yellow and green at full charge, and only wanders into the green when having to "recharge" the batteries.
  14. stampy

    Bad alternator, or is it?

    Clean all of your connections and lube with dielectric grease scrape grounds until the metal shines and scrape or replace fuses. This fixed almost all of my electrical gremlins.
  15. stampy

    Two problems with 1009, fuel and transmission

    Diesel purge is your friend!
  16. stampy

    Two problems with 1009, fuel and transmission

    So it's a bad injector or not enough air intake ( or some unknown mechanical issue...rings maybe). I put a cold air (semi-ram air ) setup in my 1009 with plastic duct from autozone and a connector from Lowes. It pulls air through a hole in the grille near the jump point (there is a knock out...
  17. stampy

    Painting bolts

    Anyone try powder coating?
  18. stampy

    Two problems with 1009, fuel and transmission

    Did you check the lift pump? If it is fouled up you wont get enough fuel.
  19. stampy

    removing the box

    We slid one off after unbolting it using a cucv and a come along. Really it was safer than it sounds....REALLY...
  20. stampy

    M37 Difficult starting after sitting a week.

    I figure the fuel is draining back to the tank. I have a jeep that has done this also. Easy fix is a boat primer or and electric primer pump. Or you can search and find why it is draining back which is the correct long term solution.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks