Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Well, it was ~mostly~ dark at 0530 when I left for work. Camera was sitting on the driver's side mirror. It's difficult to tell from the photos maybe, but the lightbar illuminates the entire area around the truck, from 9-o-clock to3-o-clock, to daylight. The landing lights have a lot more...
I finally got around to finishing my lightbar. The six HIDs across the front looked good, but the two halogen bulbs in the corner reflectors looked yellow in comparison. I installed the H3 HID conversion and got it wired to the SmartSiren head in the center console. The slider switch in the...
Well if we're going to talk radjo, here's my current set-up. The VHF control head is on top, then the remote for the spotlight, then the SmartSiren control head, and finally the UHF control head. The VHF body is under the driver's seat on shock-mounts, the SS body is inside the console, and...
I found the skid-plate under the fuel tank loose on mine; it was making a loud chirping sound at certain speeds due to vibration. The other noise maker on mine is the back seat catch.
Don't take offense, I'm only asking. And you're right, I don't have to like it.
Of course, it begs the question; how fast do you usually drive blindly through the brush in reverse?
If you're going to put it under the hood, maybe it would be more appropriate to use a marine fuse panel that was made for damp conditions.
A quick search on amazon finds this one that's not only marine grade, but less expensive.
I picked up this marine 24v inverter from craigslist for $50 or $60; I forget the rating but I can look later. A lot of boats use 24v so that's one place to look.
EDIT to add: I routinely troll cl for stuff, using search terms like 24v, 24vdc, 24 vdc, 24 volt, and 24 volts. You never know...
The last time I bled the brakes on my 1009 I messed up and got a big air bubble in the lines. There was enough air in there to compress and consequently almost nothing would come out the bleeder. The wife was getting tired of playing so I just hooked up the big vacuum pump and sucked the air...
Yes, they unscrew with a torx bit, I forget which size though. Mark the location or just pay attention to the marks on the paint when you reinstall. I put the pin head-down on the concrete floor, put the bushing on, positioned a 14mm deep socket on top of the bushing, then tapped it on using a...
I installed the plastic bushings on the door strikers, now my doors close with just a push. I was needing to slam them so hard I was worried the window might shatter. I was about to call a body shop to get them aligned but dang if they didn't look like they were aligned just fine to me. Some...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!