• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. KLChurch

    mep 004a no fault lights working plus more

    OK that someone is taking a well disserved shower. It is freaking hot out here. Be back after he is dry. Kris
  2. KLChurch

    mep 004a no fault lights working plus more

    P45B had 24VDC in Run and start mode. Will test if the sucker starts in 15 sec tries. Batteries are fully charged. Kris
  3. KLChurch

    mep 004a no fault lights working plus more

    Bless you. But Murphy is starting to like you more than me. (Murphys Law) I will be glad when he is my enemy. Will test P45B Thanks please persevere. Murphy does not like that Kris
  4. KLChurch

    mep 004a no fault lights working plus more

    Could not find a P47B on S2. found a P47A. Kris
  5. KLChurch

    mep 004a no fault lights working plus more

    ok I have already jumped the connector again. just need to find the S2-9 wire and terminal. So I will check for 24 VDC first and then start? be back shortly kris
  6. KLChurch

    mep 004a no fault lights working plus more

    So we are still talking about P47B?
  7. KLChurch

    mep 004a no fault lights working plus more

    Ok So I guess even though the battle will run the pumps for a long period of time in slow motion the pumps will not run when the day tank is full but the battle will still make the pumps work even though the day tank is full? Will test S2-9 now
  8. KLChurch

    mep 004a no fault lights working plus more

    This is my jumpers using .0625 inch dia solder. Just the correct size. Paper clips are .032 dia Kris
  9. KLChurch

    mep 004a no fault lights working plus more

    Tested two ways with S7 pin 9, jumpers still installed and then connector with jumpers uninstalled with connector installed. both tests had no 24 VDC. This was in the start mode and battle off. Kris
  10. KLChurch

    mep 004a no fault lights working plus more

    S7 is the battle switch correct? Kris
  11. KLChurch

    mep 004a no fault lights working plus more

    Do I take the jumpers off before I test S7? Kris
  12. KLChurch

    mep 004a no fault lights working plus more

    Jumped the connector A& B plus G&H. Put it in run and no pumps. Battle on pumps running until it slowed down. Battle off Start mode and cranked for 20 secs, no start. Kris
  13. KLChurch

    mep 004a no fault lights working plus more

    Ok thanks, I will give a report shortly Kris
  14. KLChurch

    mep 004a no fault lights working plus more

    Been trying to find the letters on the connector but even with a magnifying glass I cannot read them. Do you have the wire numbers? Kris
  15. KLChurch

    mep 004a no fault lights working plus more

    OK Will do but the engine does crank, but will not start in the start mode. Kris
  16. KLChurch

    mep 004a no fault lights working plus more

    Thanks Chainbreaker, perseverance. Kris
  17. KLChurch

    mep 004a no fault lights working plus more

    Thanks good night Kris
  18. KLChurch

    mep 004a no fault lights working plus more

    Until the batteries ran down Have to charge them back up kris
  19. KLChurch

    mep 004a no fault lights working plus more

    Hooked everything back together. Used battle to fill up the day tank. Bled the lines and no air. Tried to start and no start with battle off. Kris
  20. KLChurch

    mep 004a no fault lights working plus more

    OK It will take me some time put it back together and try to start it. Kris
109,486members
164,412threads
2,313,943posts
582online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks