Search results

They work fine front and rear, same adapters. Get up with Peashooter on here for adapters.

Just curious how you have them connected to the house. Thanks.

Excellent. I'm going to build some of those doors.

Sounds good to me. There is a piece of plywood bolted to the top of the bows and the cover is over that. I can see that it has been run from the exhaust soot on the wood with the cover intact. Thanks for all the information guys. I will try to fabricate a weatherproof plexiglass panel/cover...

Thanks a lot. The power is still on but the wind is really picking up now. Mine has the ASK sheet metal covers so I will try to find the air intake handle. I did find the oil pressure gauge the other day with a flashlight. Will relocate the gauge to the inst. panel I suppose.

Thanks for all the helpful input. It's midnight here now and the power is still on. The generator trailer is in my shop across from the home. I will use my loader to make a road to the home then tow it over if needed. And no I have not started it in winter before. Is there a different process?.

Calling for a two day blizzard here in Maryland and I was wondering if / how to run the generator if/ when the power goes out. All the wiring is completed and I can trailer the generator to about 20 ft to the outside inlet. Will blowing snow hurt the generator and how do I use the cover on the...

Excellent post, thanks.

Looks like Maryland won't let you do that. Next they will be tagging riding movers and weed wackers.

Good information. I will check with Maryland laws on this. But you know how the peoples republic of Maryland is.

Don't need it at all. Actually would have to cut it way down in length to work on a generator. As much as I would un-bond a wire nut would work.:grin:

I like this switch http://www.amazon.com/Flaming-River-FR1003-2-Switch-Lever/dp/B003LVQJGY

I don't see why you couldn't use one of these switches http://www.summitracing.com/search/part-type/battery-disconnect-switches

What is needed in Maryland, in my case, to register and tag my generator/trailer combo?. If I tell them it's a M116A2 trailer I am sure I will get the deer in the headlights look.

I mounted an 8x8 inch box above the normal"lug box" and installed a Leviton cs6369 receptacle with a spring loaded cover in it.I made a 50ft 6/4 twist lock 50a cable to connect generator to the inlet box on the outside of the house.From there it finds it's way through a main lug box with a 50 a...

All of you guys have nice setups.[thumbzup]

Found it thanks to you. Now I am going to move it to somewhere readable.

Has anyone relocated their oil pressure gauge to the front panel or anywhere it can be viewed?.Just want to know how you did yours.There are a lot of things you can't see, like the auxillary fuel can adapter I found yesterday after I just bought one and the oil pressure gauge. It does not look...

Bill, have you had to use it by now?.

10-4. Thanks for the information.