• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. T

    Help! MEP-002a starts then immediately the solenoid kills the engine-what all can trigger this???

    Okay, I have not tested the wires but the even with the oil sensor unscrewed it did not change the kill solonoid turn the engine off after start, fuel pumps kick on great. I discovered a washer out of place on one of the pumps so due to the advice I got here I was able to fix the broken pump so...
  2. T

    Help! MEP-002a starts then immediately the solenoid kills the engine-what all can trigger this???

    You are amazing! What would you advise trying to test? I tested the oil pressure sensor and it was good and the temp sensor on the far side of the engine and it was good. I am just jumping the terminals to test is there another way or something else that I can try?
  3. T

    Mep-002a fuel pump question

    Yes it is messed up, I remember seeing it looking strange, how do I fix it? I could not find anything on youtube? How do I get a rebuild kit?
  4. T

    Help! MEP-002a starts then immediately the solenoid kills the engine-what all can trigger this???

    The pull out throttle lever increases slightly then it reduces back down. All this is with the solenoid jumped to 24 v
  5. T

    Help! MEP-002a starts then immediately the solenoid kills the engine-what all can trigger this???

    Right when it starts, what is a loss to k1? Can you elaborate a little bit please? How do I check that? Thank you for the help!
  6. T

    Mep-002a fuel pump question

    Out of three pumps I have 1 that's pumping as it should, I broke one trying to adjust the 90 on it and the old primary won't build pressure. Can these pumps be rebuilt? There really expensive! Can it run well off of 1 pump? Fuel is not far away.
  7. T

    Help! MEP-002a starts then immediately the solenoid kills the engine-what all can trigger this???

    I searched the net and the forum and could not find the answer, tested the oil pressure sensor and its good as well as the engine temp sensor? and it was good. My generator has no fuel tank but i'm not sure that that would trigger the shutdown of the engine. I also have read the manual and...
Top