Search results

Bad primary check valve. Would that be the little governor needs replacing? Sent from my moto z3 using Tapatalk

Which is primary second and wet? New to 923. Sent from my moto z3 using Tapatalk

Tires are good but dryer is piping off every few seconds now. Sent from my moto z3 using Tapatalk

I got that after reading a bit. Unplugged and back worked for 60 miles then blinky again. Dryer is purging every 10 min or so and primary is losing air fast enough I can see needle move. I'm getting down the road though. Sent from my moto z3 using Tapatalk

Could the air dryer cause the system to continually cycle and purge? Sent from my moto z3 using Tapatalk

Primary air pressure is just below 90 secondary is perfect. Sent from my moto z3 using Tapatalk

It started out fine. IM hearing an air leak under front of engine. It's slowly getting worse the more I drive these horrible New Mexico roads. Sent from my moto z3 using Tapatalk

I am in New Mexico and recently picked up a 923A2. My front drivers boot is leaking oil now and my all ctis lights blink. The air compressor is constantly running. Can I unplug the ctis and drive home? Or just deal with it? I'll m a deuce guy and don't really know the ctis system. I am currently...

I like the 14.00 20 tires but I believe they are getting harder to come by. Been told that, but everything is hard to come by where I live. I may go to 16.00 at some point but have a supply of 14.00 that should last me quite a while. Sent from my moto z3 using Tapatalk

Could be worse! Sent from my moto z3 using Tapatalk

After my FDC, mine was still leaking, new HH o-rings, still leaking, finally the Booster pump seal did the trick. Sent from my moto z3 using Tapatalk

Usually the other way around. Sent from my moto z3 using Tapatalk

Probably need to replace it anyway. Sent from my moto z3 using Tapatalk

B-25 Mitchell one of my favorites as a kid. Man sad to see in this condition. Sent from my moto z3 using Tapatalk

One or two at a time. You can do jack stands under the whole thing just stay the heck away untill you start putting tires in again. I've seen many a truck fall just front or rear lifted up. Sent from my moto z3 using Tapatalk

I would jack it up to the point the tire is barely touching the ground and you can "walk" it off. That's what I do with my M54A2 five ton on 14.00 20 and 939 rims. Man are they heavy. Sent from my moto z3 using Tapatalk

Mine was pretty bad but seems to work fine now. Sent from my moto z3 using Tapatalk

I bought a rebuild kit from Big Mike's and it's pretty straight forward. Just make sure you don't have too much pitting inside the can. If you do just get a NOS can. Sent from my moto z3 using Tapatalk

Long style? Sent from my moto z3 using Tapatalk

Saw one with an 105 A3 bed that looked awesome. I also have an LMTV trailer that might be a good fit. I like the tie downs in the bed vs on the sides. Can't remember where I saw the pics though. Sent from my moto z3 using Tapatalk