Search results

I just about finished the Head gasket job on my '68 M35A2 and found that two of the orange rings at the tops of the injectors are bad. The ring between the injector and the head. They are puffing in and out with every compression stroke and I need to replace them too. Does anyone know where I...

My father and I recently got a 1971 M818 5ton tractor from Gov. Liq. For the most part the truck is great. But at around 45 or 50 the truck gets a horrible shake to it. the shake is side to side and doesn't transfer into the steering wheel. I checked some things and found that the passenger...

Since we are on the subject... where can i get the thin shim or gasket the goes from the frame to the glass?? not the outside of the frame to the truck. thanks for any info.

I am in the market for some new windshields. I was wondering what a blasted, and painted windshield frame for a deuce is worth. one with new glass, outer seal and all the arms and brackets. I know a new one without the lock or locking arms is around 160. is 180 too much to ask for one with...

That is a very nice site. I have just sent them an email had think I have have made my decision. As long as I get the answers I am looking for then I think my search is over. Thanks again. I will let you know the outcome.

I am in the market for a sand blaster but have no clue where to start. I know I would like a larger one and already have a large air compressor for it.( it runs jackhammers so i know it will work). I would like it to hold around 100 pounds or more of sand. But I am not too sure what I need in...

my old man sells slushing compound for sealing tanks also. it is white not read but works beautifully and sells it for 26 bucks a quart. it will stick to just about anything and will last forever.

I would be interested in a fording kit also. If anyone has one for sale please let me know.

I actually am looking for a 10' cable. I have an 8 foot but it is a little on the short side to be able to be hidden the way i want it. Thanks for any and all info.

RE: N/A exhaust pipe needed - illustrated part # shown I believe that I still have my pipe from when i swapped my N/A engine out for a whistler. I will look for it at the house this weekend if you are still interested. if you already found one then good luck with installing it and hope it...

I am having a problem with my horn all of a sudden too. I think it is the ghround where the spring rests againist the nut behind the button. Everytime you jump the button with a screwdriver the horn works but with the button in a few miles down the road it stops working again. I have a new...

I think I would leave as much of the brake fliud in as possible unless you are flushing the system. I know that DOT3 brake fliud attracts moisture that is y you have to use it from a sealed container. I don't think that DOT 5 does much better. I could be wrong. I was thinking that the 5 does...

I was wondering if anyone knows the best place to get the gasket that goes between the glass and the frame. not the weatherstripping that seal the windshield frame to the large fold down windshield. I have found everything but the glass gasket. thanks for any and all info.

I didn't have to get anything inspected when i got the tags. well the deuce anyway. i was told the trailer would need breakaway and i also kinda like it just insace something happens. but we will see if it is too much of a pain to do.

MODS........Not sure if this is the right location but it is about deuce parts. feel free to move it if need be. I just ran into a little problem with an order I made over the weekend with OD Iron. I sent them an email explaining the problem and within 1 hour Mike called me and we worked it...

I have a flatbed trailer that I believe is a M390. does that make sense to anyone?? But it does have three crank down stabilizers with 10" or so round pads. two in the rear one in the front where the hitch meets the frame. It is about the size of a M105. It also has expanded metal for the...

I think that should be an R at the end making it 77cr. I think that is for Command Reserve. At least that is what I was told about my truck. But i have been wrong before.

I am in the process of repainting the deuce and have reached a roadblock sort of. I am having a hard time finding out what style the letter are for the U.S. ARMY and the hood number. I am pretty sure they are 3 inch. or might even be 4 I can't remember now. Please help me out I am running...

NICKD, Check your PM's

I got a set of 6TL's when i first got my truck and i hated them with a passion. Whenever it would get cold and the truck would have to sit outside it would never start. they would go dead in about 2 or 3 days if it wasn't ran while it was warm. they were way more trouble than they were worth...