Search results

Looking for 53's to outfit 2-3 923A2 trucks. Who is the go to guy these days. Thanks. Sent from my moto z3 using Tapatalk

If you don't know anything about the machine there are plenty of guys to help out on here that are very knowledgeable. That said there is a big learning curve, and they can be somewhat complicated. No one can tell you if you should buy something. Do you have the $ and time? Diesel engines can go...

That's sexy. Sent from my moto z3 using Tapatalk

The plug is keyed to only fit in one position. But the ring was just loose enough that it spun and didn't line up anymore. Maybe over time it got loose. I may had disconnected the switch and it spun on me. I was going to swap switches out for a new pretty one I had. I inadvertently caused the...

Well well no wonder the sleeve on the wiring harness when switched spun when I disconnected it. So the pins where in the wrong place which is why I got no power at 16 or 15. I figured out I clocked it correctly and voila my lights work again. Simple. I appreciate the help. Sent from my moto z3...

Checking the pin #s on my two switches they are different and the letters showing the on the wiring harness are different as well. Are there different three lever switches or does someone have a pin diagram of the harness? Sent from my moto z3 using Tapatalk

Yes maybe I was doing something wrong last night Ill check things again in the daylight this afternoon. Sent from my moto z3 using Tapatalk

I'll get back to it this afternoon. 15A should be 24volt + or F pin. Thank you. Long day yesterday. Sent from my moto z3 using Tapatalk

Yes Sir all the way up on panel Bright. Yes everything is plugged back in correctly. That is my delima. And why I'm scratching my head. I'm hoping I just misplaced something or while I was in there I accidentally unplugged something but I keep going over and over it. I'm using a multimeter and...

Absolutely possible. Sent from my moto z3 using Tapatalk

The only thing I did was plug in a speedhut gauge. It was working fine when I installed it and went to bed. This morning no headlights brake lights or dash panel lights. All marker lights and turn signals work. Sent from my moto z3 using Tapatalk

16A has no power on this switch or the brand new switch I put in this morning. There is no corrosion on either switch and they look like clean new pins. Sent from my moto z3 using Tapatalk

No power through panel lights. And no power to headlight dimmer switch. The three lever switch has no effect on bright or dim in the panel. Sent from my moto z3 using Tapatalk

Everything is reconnected after taking new components out and the breakers were not touched. I disconnected the batteries for a bit to see if the things would reset and still nothing. My only guess is I shorted something. I forget when I go to lights on my turn signal lights stay on? Sent from...

Taking the negative off did absolutely nothing. Sent from my moto z3 using Tapatalk

Yes Sir. I just put a new smart box in the day before. And put in a new three-way switch to see if that was it but still nada. I'll unplug and see if that resets things. Sent from my moto z3 using Tapatalk

I'm having a helluva time. I purchased a "speedhut" speedo and hooked her up. Looks good works well. But this morning when firing up my m998 up my headlights don't work and my dash lights don't work? All my gauges work and my running lights work. Any suggestions, besides get rid of the...

90 degrees here today. It's a Shorts and no shoes Christmas. Merry Christmas to everyone as well. Sent from my moto z3 using Tapatalk

I've got an M54 I use as a fire truck. Smokes a little all the time but when I romp on it, definitely rolls coal. Run Her tills she pukes. Sent from my moto z3 using Tapatalk

I would go glass, unless you are armored and live in a Commifornia big city. Sent from my moto z3 using Tapatalk