Search results

Please post the specific laws/statues or letters of your state's actions. We are facing the same problem in La. Others have mentioned of problems in Idaho and Va. Is this from Ca or Nv ?

Interesting, as the rear ones I have seen do not have solenoids at the winch but there is a block for them by the windshield washer bottle/Cadillac valve. I have not seen that valve either? Also looks like there is 2 ports at the solenoid block? Mile marker tech support is very friendly and...

Cool as they are hard to find. It appears the first ones using the towers were bolted to the fenders bare. I guess some whacking of trees and overhead clearance issues, They issued a bulletin I found in the PS magazine to retrofit plates top and bottom. Plates are easier and cheaper than fender...

I do have a large multi pin connector cable that came with it for the control. Not sure on Power? Is the ceramic cone with a stud/nut the power? Ironically , I think I will be up your way in Sept for my Niece's wedding. She dances Ballet at a company in Indy but I doubt I will have my toy with...

What is up there? That is way too tall for a mg mount or chicken shield? Inquiring minds want to know because if that is some electronic gizmo like a tow launcher, Oh boy, I would like to see that dirver's explanation video......

Installed roadside fender antenna tower Installed the roadside (driver's) antenna tower and upper & lower reinforcement plates. Takes lots of 1/4 screws.... Part numbers and pics of install. Busy area under the fender with fording exhaust brace, seat belt brace and antenna reinforcement but it...

Greek custom version with a scheme similar to the old merdec

Mexican digital is cool!

found these 2 interesting articles. Major points of failure analyzed by army is non military grade solenoids and boxes not sealed weather proof. Also, Search the hmmwv section as Greg 86humv did a nice thread with all the types and pictures of the boxes and senders.

make sure battery is disconnected. Probably it was time for the magic smoke to release. Replace box and temp sensor/GPC (green box does not matter as wire is not used so if you replace with another green label, no need) to new ees style

There are 2 different bumpers. The older style take the same shackle as the front and has no large hole. The A2 bumper has a large hole for the tear drop style shackle. I have the castle nuts only for the tear drop if needed. The first pic shows the A2 bumper with the older set up. The older...

My recommendation is to stick with dexron as the hmmwv system is more complex than most others with the fan clutch, hydroboost, & power steering & winch (if equipped) sharing the same fluid. I don't think fluid caused your issue. Dexron III is backwards compatible with II and easy to find...

I was very disappointed in December as I made a special trip to see the boneyard and PIMA Air & Space Museum. I knew about the bus tickets and called 2 days out to reserve/pay. I was then asked did I do my background check? Huh? New rules in November implemented mandatory background check 10...

There are some fancier lug nut sockets with a teflon/plastic ? sleeve so they don't scratch fancy wheels for deep tight access. I would try a 6pt chrome or maybe get the specs from those fancy sockets to get outer width? I just find it crazy to have a special nut with standard threads and...

OE studs are 13/16 with a 7/8 nut. There are specialty thin wall wheel nut sockets for tire shops out there. Search epay "steelman 78276" for one example.

I would be very Leary of removing the mesh and being able to ingest large debris. Yes, I know the air filter should catch it but the idea of stuff going into the can does not appeal to me. There is one way to get more air down the pipe. There is at least 3 different makes of prefilter oe for...

I think you will need the starter casting/tag number to get the correct 24v solenoid. I "think" there is an ac delco version and a prestolite starter that were interchangeable. If you can post up the numbers, I will try to id. There is a tm here for just rotating electrical (starters &...

Whack the solenoid and the back of the starter by the brushes and see if it makes a difference. Sometimes the brushes can stick when worn and you can get it to release and start. The solenoid is widely available but if you go that route I would replace starter. If replacing the starter...

I stayed at Holiday Inn express recently... All, I can think of is all that extra hose footage and extra potential points of failure at each connection. Where would you mount the bypass? If in Cab, I would be leery of running a "live" hydraulic hose where failure could make a real mess....

What plate do you have or are you a military vin stencil which has a different statue?