Search results

Yes, Your rear set will fit. Not to my knowledge on the longer ones, There is an epay vendor that pedals them but he has a lot of "aftermarket" stuff. Reason they are the same is for continuity I suspect.

check out MWO 9-2320-280-35-2 https://www.steelsoldiers.com/showthread.php?164864-M998-MWO-s

It takes the same shackles as on the front or rear bumpers. Typically beltfed has some on epay or try Greg 86humv

also make sure the cable going to the heater control valve does open it fully. My valve stuck around 3/4 but had more travel available but was not as smooth on the last part. I ended up changing the valve anyway as they are cheap and readily available. I 2nd a good flush of the entire system...

Are you sure you got the right pic? That looks like Canada not La :-)

Snow in New Orleans! Don't have snow in New Orleans more than maybe once a decade but today we did. I don't think my m998 will see this stuff on a regular basis! 8-)

Found out this is a cobham chelton gd1813 if it helps someone down the road. Attached spec brochure.

one manufacture : Dayton Granger Antenna UHF/VHF AS-3588/GRC206 D/G PVU10-700 Cage 556S3 It has 2 antenna connectors on the bottom for both UHF & VHF. It is used mostly on some forward air controller radio sets from what I found. some pics...

Some later armored heavy models had a 2nd rear fuel tank. Some of the more hmmwv knowledgeable folks can expand. http://www.hmmwvinscale.com/hmmwvauxfueltank.htm

It seems crazy to me that Amazon ships batteries at all. It used to be a hazardous cargo and subject to proper packing so that it could contain any spilled acid in my days running a NAPA warehouse. Very rarely did a battery go out UPS except for dry cell without acid. Was the box marked with...

Or a picture of the new design? I am also interested in finding out more about the new type?

If it is a NAPA company owned store you can get traction with Corp Mgmt, If it is an independently owned jobber store, Then you need to seek out the owner who could have been the manager.... NAPA mgmt has very little influence on an independent owner as the relationship is the other way around...

was the replacement sender new or used? I would suspect you still have a bad sender?

Nice combo and looking outstanding. Glad to hear you are rolling....:tank:

I have the tm in pdf if interested send me a pm with email addy

I sold my rear set. I do have a supplier with more pillar blocks but unsure when I will place another order as there is a min $100 and I just placed 2 back to back. If you can wait, I can add to my next goodie order.....hopefully soon.

Would this also work for the commander and high back HMMWV seats?

Yes Sir, What was sold to you as 4 upper mounts, should be 2 plus just 2 barrel clamps without the sliding bracket & wing nut stud or cheese grader bracket needed & missing the 2 blocks. The rear uses a block that bolts to the B pillar and the barrel clamp bolts to the side of the block like in...

Not sure the issue you faced but here in the Banana republic a title, notarized bill of sale , Police vin verification form, and a bagful of $ are required. Our last governor was kind enough to enact that all Title transactions require $75 just for the title plus registration and plate fees plus...

It came filled with old school plain ole green stuff. I would say any good name brand green stuff not the red/orange/purple, copper or extended drain interval stuff.( I would not mix if topping off with extended) .