Search results

Thanks for the info! Looks like I will be headed there for the first time this week...

The remnants of duct work modifications. Then took the time to cover up my work and made it match the walls. I also spent some time with the fuse panel in the back. The wires on the walls have not had power no matter what I tried, the GPFU switch in the dash made the relays click but nothing...

Intake vent for the heater is reinstalled in its new location. I turned it to keep it low enough for a bench on that side of the interior. No pics of the fab of the old duct into the new version due to scratching of head to make the right cuts to make it work. :roll: But I’m happy with how it...

Yes the wheels are heavy... my H2's with 295/70/17 were a couple pounds lighter than the oem's. At least now I have a starting point and can keep track as I install stuff back in. It adds up quickly...

Out of curiosity I ran the M1010 over the scale at the scrap yard... One tank full... one half. Figure about 6650 with both full.

Because Gary called me out... I put an addition on the M1010...Not really but it feels like it!! Less a cave now! Both filler neck covers are installed. :clinto:

Which Dometic fridge do you have? Been looking at them, the CFX65DZ actually. Wondering how you like yours?

A little spray bomb... pretty close. Took it to the station and put 10 gallons in... gauge is close but a little over half.

Cut through the floor for the filler... Note: would be much easier without the tank installed!!! :razz: I need to pick up a grommet for the vent line to protect it. Then I'll seal it and put the cover on.

Equipped with extra metal siding from cutting out the windows I took on a long over due project...

Other side... ran into something that was slightly different then the M1010 box reference thread showed. Luckily I was able to flatten out the bundle. I added the foam into the cavities so the windows had something to clamp down on.

I felt the cave needed some light so I purchased some windows...

I have been driving her some and even went out of state! Roughly 1300 miles since getting her running again! In hopes that someday I actually install all these suspension parts I have started cleaning and painting the chassis with Chassis Saver. Wire brushing is soo much fun!

Been slacking on updates I ordered and got some more suspension parts in to add to the collection. Rick (CUCVRUS) was gracious enough to help me out with a door since mine was missing so many parts! Nice to have a door with a handle and latches. Thanks again Rick!!!

Thanks, I will be doing the same here... I thought about checking today but it pouring right now

Inspiring to read! Started ordering parts again! Looking for the bracket of course... :beer:

It's been a while but she has been getting some exercise and showed some patriotism on the 4th! Copilot seemed happy?!?!? On the hunt for a 700r4 tv cable bracket...

It was one of the chrome spray paints. I sprayed it into a cup and brushed it onto the panel...

One other project in the interior that I got accomplished. A M1010 cup holder. I've been looking at the radio tray brackets knowing there was something they could be useful for. Here is what I did with the one... have plans for the other side as well.

I did some more work on the door panels before reinstalling them. Just a little paint to get them to match the dash trim...