Search results

I don't have any extra lift rings, how about the other owners on here ?

Sort of like sandblasting sand in the Goat..

Do you need the ring on the side of the body or one of the top corners ?

I have these 3 seals taken out, the large one is what I call the wiper seal, and the inner and outer bearing seal. The inner seal has a few spots where I had to use a punch to get it off as it's driven on the end of the spindle. I'm sure you can flatten it back out. The rubber is all soft and...

http://www.steelsoldiers.com/showthread.php?141472-Operation-quot-URGENT-RESTORATION-quot

Do you still need the bearing seals? I would be willing to pull one set from a hub I have.

PS magazine...

Alan I believe these are the parts you are looking for, I could only find 4 of them. Nice talking with you on the phone, working on shipping those tires. Mark

Tom, I measured 11 3/8 from center of governor pin to center of rack pin, picture is how I measured it. It was my experience that I could not remove or install the rod with the head bolt nearest the governor in place, not enough clearance. Mark in TX may still have his if it did not get...

Looking for help getting 6 Gama Goat tires from SLC Utah to Back East, destination is Maine. I would be happy just to get them to MA area. They are 40"x12" and weigh about 85lbs each. SS express or if you are a shipper I would be interested and I am not in a hurry, if it takes a month or two...

My 1971 M792 Gama Goat

Thanks Tom, it wasn't as bad as I thought to get it installed and it made a world of difference as I can open and close it by myself easily. I had to take off 2 weeks of work to get it done enough to take to the rally. Just not enough time in the day to get it done. When you get a chance post...

Thanks, your part is packaged in a flat rate medium box and will go out tomorrow. Another item I forgot to install was the engine cover torque rod, installed that after work today.

Each fender uses 5, thanks.

Sounds good, pm your address and I will send it along.

While I was browsing the rally the wife said someone said I was missing some grommets on the goat, I just did not have a chance to get all the small stuff done. So today I remembered and put them in. I am also missing one on one of the battery cables, need to get that one. I am also missing...

Andy, I pulled the part you asked about from the carrier today, it has some rust holes in it so not sure you still would want it but if you do I will send it to you.

Mark, those fender skirts were a local commander authorized modification, my PS magazine archive has the dope.

Had a great time at the rally, met up with fellow goat owners Jericho and vst24474vt at the rally although absent their goat's. Andy was a wealth of knowledge on the goat, gave mine a run and we decided that I have a pretty good growling coming from the transfer case. It wasn't there when I...

Looks good, great job on the pattern.