• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. E

    Th400 going bad?

    I had a similar problem with my M1008. turned out that the pickup tube on the transmission filter was backing out and not making a good seal. As you know the transmission filter moves up and down. I removed the bolt holding the filter, installed a longer spacer on the bolt to keep the filter...
  2. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Awesome! Great hobby, rewarding, and endless possibilities.
  3. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    That was just a range I felt you could buy a decent tester for , no particular tester in mind. Off to work!
  4. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Why buy adapters you may never use. the adapters are cheap and you can buy them as needed.
  5. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    No! Not needed. In my opinion you can time your engine with the injection pump,put the marks together, test drive, re adjust if necessary.
  6. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    I am not aware of compression testers that are for diesel and other cars. I'm not quite sure of your question. The diesel tester can be used for any diesel engine the only difference would be the adapter that threads into the glow plug thread. The tester can thread any size adapter needed for...
  7. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    No reason to blow it up when you can just fix it. letting it go can be a costly decision. Why rebuild a complete engine when you can fix it before it blows. Run a compression test, if the compression is good then you know you have a motor worth saving. Repairing a push rod or a lifter is really...
  8. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Did you check out your valve train and rocker arms when you had your valve covers off? The plastic guide buttons get old and can let go at anytime, causing your rocker arm to move on the shaft, this can cause you to lose contact with the valve and push rod.
  9. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    I think before I would start tearing into the system I would invest in a diesel compression tester $75.00 dollars and do a very non invasive quick and easy compression test. Or take it to a diesel mechanic and have him listen to it and maybe he could steer you in the right direction.
  10. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    I don't think air in your system is the problem, although it could be. Maybe your fuel pump, injection pump,fuel filter, you can put a clear fuel line to your injection pump and visually look for air in the system. I think if air was in the system you would be having starting problems.
  11. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Yes you can access the three nuts on the pump, the hardest one is the drivers side top nut. You need a thin wrench or grind one down a bit, the one nut will only let you turn the nut in very small increments and re positioning the wrench.
  12. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    I didn't realize you don't have a spin on filter. No way your going to be able to do that with a horizontal type filter. With a spin on type filter you could empty the filter fill it up with product and run it through the system. It would not be the way they show it, but the right way to do it...
  13. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    You could remove you glow plugs one at a time and do a compression test which would give you an indication to the health of the engine. You will need a diesel compression gauge and the proper glow plug attachment.
  14. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Sounds like you would need to remove the filter and fill it up with the product. The only way your going to hook it up the way they describe in the video would be to remove the bed hold down bolts, shove the bed back 18'' and then you could access your fuel lines from the tank. A lot of work...
  15. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Yeah I don't think turning up the fuel is the way to go. He should of asked you if that's what you wanted. It can be turned down by removing the cover on the injection pump and turning a screw I believe. I don't think it is a big deal but I have not researched how it is done. I you want some...
  16. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Looks like a lot of carbon buildup. One of them seems to have a lot less.
  17. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    I would drain all the oil,smell it for diesel, or any burnt smell, feel it for any abrasives,and refill it with fresh oil and filter. Your do for an oil change anyway.
  18. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    You might want to check you flywheel bolts and make sure they are all properly tightened.
  19. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    Sounds good, that might be some kind of clue. Looks like your just coming out of the Imperial Valley. I just noticed you said Utah. My truck never runs that quiet. Very impressive.
  20. E

    Was looking for a shop in or near Milwaukee to work on M1008; then did it all myself!

    You temper a knife to make it great, You'll look back and you will be stronger than steel. You will get it fixed, if you are like me you'll keep this truck until they won't let you drive. Your in it to win it no matter what.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks