Search results

I need the bows with corners (5) and the wood right hand side. PM me with price. Do you have the parts (10) for between the stakeside and bows also? Bert

I'm looking for: 1.) Frame and tent bag in good shape for a command tent. 2.) M101 trailer right hand (wood) stakeside and uprights for the top bows. I will also need the topbow cross parts. 3.) Sceptor diesel fuel can and a fuel can bracket. 4.) Antenna and mount for a M1009. I have the brush...

I would make sure what kind of material the keys at the hardware store are made of. A plain steel key will not be rated for hardness and the vibration of the damper will peen the key in short order, causing a spin failure. A SAE No 8630 alloy steel key is better suited for the application...

Rory, Great looking bunch of kids, congratulations. Thanks for sharing the photo. Bert

FMJ, How did that 09 tow on the U trailer? Bert

You may want to look at the base gasket, there are three that are close but they don't allow vacuum to the accelerator pump properly. This would be a simple fix. Here is a link to the different gaskets: http://www.g741.org/PHPBB/viewtopic.php?f=3&t=5348&p=41869&hilit=Carb+base+gasket#p41869 Bert

The TM callout for timing spec is wrong. This has been discussed many times on the G741 site. I would set timing to 4 degrees BTDC with a timing light and then fine tune it from there. I would also check your float height and make sure that it is NO lower than 5/64" below the top edge when...

Brian, I would only need the right and left bumper halves. I will PM my email address and phone number so that you can send me pictures and we can talk prices and shipping. Bert

Brian, If you don't need the winch bumpers, I would be interested in purchasing them. Bert

Nice trucks, I really like the M151A2 Bert

Looks like a parts book from Boyce. Bert

The NAPA store here also sells exactly the length you want also. Bert

Nice looking truck. Bert

Good luck on your trip to the new homestead. If you need any help when your passing thru my area shoot me a PM. Bert

Hi John, That is a good looking M37. It looks like it had a winch at one time because I can see the hole in the floor has been opened up and you still have the locking tab in place. Is the PTO still on the tranny or is that gone to? You should start looking for a longer shifter handle also...

Frank, Do you have room by the chopper for the sub or are you looking to free up a little space in the yard? I can be there in 45 minutes with the heavy equipment if needed. Bert

It's automatic rustproofing.

Very nice looking truck, could you post up more pictures of the cab interior, engine compartment comm box and etc? Bert

Bad ground. I just cleaned all of the ground locations that I could find last Saturday while I was working on my 09 and my fuel gauge started to work properly. Bert

Siebel, Nice looking truck to start with, and it runs. Make sure to stop over on the G741.Org site and get it set up in the registry. There is a wealth of knowledge on that site specifically about M37s. Bert